Elektroda.com
Elektroda.com
X

Deleted by the author from subject number 3435827

djmarco83 327 0
This content has been translated » The original version can be found here
  • #1
    djmarco83
    Level 10  
    How would anyone have for sale the entire module is ready to be set up or if someone had the opportunity to repair my module after sending it to him then please for info.

    Thank you in advance.

    Added after 6 [hours] 26 [minutes]:

    So how do I buy this displayTo view the material on this forum you must be logged in. it will work properly after soldering the tape?

    darekblas34 wrote:
    Good morning
    I replaced the display with nona 830, the BL-12864G display fits.
    The display needs to be soldered, but it is not as easy as you think.
    If you do not have equipment, do not approach it, just give it to someone you know.
    The original display has the SSD1303T10 designation and the one in Slovakia has the same designation.
    Even easier to buy the same display from Japan, do not need to be sold twice.
    Price with transport to Poland is 80 PLN, waiting time 2 weeks, air transport.
    Site of engtaobac.com or from Russia
    MI12864PO, OLED 2.4 "128x64, Yellow color, ??????????: 8 ?????? ??????. / SPI / I2C, ?????????? SSD1303, VDD

    To view the material on this forum you must be logged in. To view the material on this forum you must be logged in.




    ----
    Deleted from the subject: To view the material on this forum you must be logged in.
    by djmarco83 on 09 July 2019 17:15