logo elektroda
logo elektroda
X
logo elektroda
Advanced Search
logo elektroda

Telefunken 43UA9000 Vestel 17MB170 - stuck on logo, need USB or eMMC firmware?

cbaza 456 6
ADVERTISEMENT
Report a violation of the law
Reply | New topic
  • #1 21947017
    cbaza
    Level 2  
    Posts: 4
    π•Šπ• π•—π•₯𝕨𝕒𝕣𝕖 𝕧𝕖𝕀π•₯𝕖𝕝 πŸ™πŸŸπ•„π”ΉπŸ™πŸŸπŸ˜ π•₯π•–π•π•–π•—π•¦π•Ÿπ•œπ•–π•Ÿ πŸœπŸ›π•Œπ”ΈπŸ‘πŸ˜πŸ˜πŸ˜ 𝕑𝕝𝕖𝕒𝕀𝕖.

    AI: Please write the full Telefunken TV model number from the back label and the panel code, if available.
    π•‹π•–π•π•–π•—π•¦π•Ÿπ•œπ•–π•Ÿ πŸœπŸ›π•Œπ”ΈπŸ‘πŸ˜πŸ˜πŸ˜
    AI: What is the problem with the TV, and do you need USB update software or full flash/eMMC/SPI firmware?
    He nailed the logo.
  • ADVERTISEMENT
  • #2 21947242
    yokoono51
    Level 29  
    Posts: 821
    Help: 172
    Rate: 316
    VES430QNDB-2D-N41 panel ????.
  • ADVERTISEMENT
  • #3 21947420
    cbaza
    Level 2  
    Posts: 4
    Telefunken 43UA9000 Vestel 17MB170 - stuck on logo, need USB or eMMC firmware?

    Added after 55 [seconds]:

    >>21947242
    Attachments:
    • Telefunken 43UA9000 Vestel 17MB170 - stuck on logo, need USB or eMMC firmware? 17854116554866001717216755601024.jpg (2.57 MB) You must be logged in to download this attachment.
  • ADVERTISEMENT
  • #4 21947499
    billobirillo
    Level 33  
    Posts: 1142
    Help: 338
    Rate: 799
    Could you also post a photo of the TCON module? If it’s there
  • #5 21947561
    cbaza
    Level 2  
    Posts: 4
    Telefunken 43UA9000 Vestel 17MB170 - stuck on logo, need USB or eMMC firmware?

    Added after 2 [minutes]:


    Telefunken 43UA9000 Vestel 17MB170 - stuck on logo, need USB or eMMC firmware?
  • ADVERTISEMENT
  • Helpful post
    #6 21947570
    billobirillo
    Level 33  
    Posts: 1142
    Help: 338
    Rate: 799
    I've a software from a Toshiba, do you want to try it?
  • #7 21947576
    cbaza
    Level 2  
    Posts: 4
    Yes, I will try it.
Reply | New topic
Report a violation of the law

Topic summary

LABEL_AI_GENERATED
Discussion about a Telefunken 43UA9000 TV using a Vestel 17MB170 main board, with the set stuck on the logo during startup. The request is for the correct software/firmware for this chassis, specifically whether a USB update package or full flash/eMMC/SPI firmware is needed.
AI summary based on the discussion. May contain errors.
ADVERTISEMENT