logo elektroda
logo elektroda
X
logo elektroda
Advanced Search
logo elektroda

Firmware for 43-Inch Android TV Vestel 17MB170

Ask a question on the Forum

User question

NEED FIRMWARE FOR 43 INCH ANDROID TV VESTEL 17MB170

Artificial Intelligence Response

Direct answer to the question

  • Vestel does not publish a universal public firmware for “43-inch Android TV, main-board 17MB170”.
  • The correct package depends on the exact brand / commercial model, LCD panel code and board hardware revision (17MB170-0/-1/-2/-E, etc.).
  • Supply the full model, panel code and current software build to an authorised Vestel (or the re-branded OEM) service centre or a trusted repair forum (Elektroda, BadCaps, Remont-aud, etc.); they will give you the matching file, typically named upgrade_mb170.bin.

Key points
• Wrong firmware bricks the board or gives a black / flipped / distorted picture.
• Always back-up the original eMMC or SPI flash before writing a new image.
• Use the USB-recovery procedure only after you are 100 % certain of compatibility.

Detailed problem analysis

  1. Why one “17MB170 firmware” is not sufficient

    • 17MB170 is a generic Vestel Android chassis used in >30 brands (Toshiba, JVC, Hitachi, Bush, Finlux, Panasonic-Vestel, Sharp-Vestel, etc.).
    • Each firmware bundle contains:
      • Bootloader signed for a specific panel timing table (LVDS/V-by-One);
      • Brand splash screen, pre-installed apps, regional DVB tables;
      • IR/CEC key-tables for the remote supplied with that brand.
    • If panel ID in EDID ≠ table inside firmware you will get ‟no backlight”, colour bars or mirror image.

  2. Minimum data required to locate the right build

    • Sticker on rear cover: Brand + commercial model (e.g. “Toshiba 43UA2063DG”, “JVC LT-43VA3000”)
    • Service label inside: Panel code (e.g. VES430QNDL-2D-N11, LS430DUH-MBA1, AUO T430QVN01).
    • Main-board silkscreen: 17MB170-1, 17MB170-E, etc.
    • Current software string (Settings ▸ Device Preferences ▸ About ▸ Build) – helps decide incremental vs. full image.

  3. Common symptoms indicating firmware corruption
    • Boot loop on brand logo
    • Stuck in standby, LED flashes error code
    • “Storage full” warnings after previous wrong flash
    • No picture / backlight but sound present

  4. Technical background

    • SoC: MediaTek MT5581/MT5583, Android-TV 7.0/8.0/9.0, eMMC 4–8 GB.
    • Two flash devices: eMMC (Android, logo, panel tables) + 8 Mbit SPI (boot ROM, EDID fail-safe).
    • USB recovery looks for upgrade_mb170.bin, verifies RSA signature, erases eMMC, rewrites partitions.

Current information and trends

• Latest service manuals (2023-2024) still list the USB-OK-while-plugging method; no OTA delivered to end-users.
• Vestel introduced encrypted .IMI bundles on newer ‑E boards; only service cloud and authorised USB keys can decrypt. If your sticker shows “17MB170E”, you must obtain the service tool USB from Vestel or an ASC.
• Many technicians now back-up eMMC with an RT-809H or Batronix adapter before any attempt – replacing worn eMMC is a growing business.

Supporting explanations and details

USB Recovery sequence (classic 17MB170-0/-1/-2)

  1. Format 2–8 GB USB stick FAT32.
  2. Copy upgrade_mb170.bin (or *.IMI set) into root – nothing else.
  3. Unplug TV.
  4. Insert USB.
  5. Press and hold “OK” on the original IR remote (some variants use “VOL-” on the side keys).
  6. Plug AC while holding; LED will blink fast (≈ 2 Hz).
  7. Release key, wait 3-10 min. Screen may stay dark until first reboot.
  8. When the wizard appears, complete country / language, then enter Service Menu → Factory Reset (MENU 4725) to regenerate NVM.

Low-level (UART / ISP) recovery – only if USB fails
• Connect 3.3 V USB-TTL to UART TP-pins, interrupt autoboot, use upgrade 0 or fastboot flash system system.img.
• Requires original scatter / partition images and MTK download tool; mostly done by professional labs.

Ethical and legal aspects

• Vestel firmware is copyrighted; sharing publicly without permission may breach license terms. Obtain from the brand’s official support or provide proof of device ownership in closed repair forums.
• Android-TV includes DRM keys (Widevine, HDCP). Distributing an eMMC dump with keys is illegal in many jurisdictions.
• Ensure GDPR compliance if the TV stored personal data – factory-reset after flashing.

Practical guidelines

Do
✔ Photograph all labels before closing the back cover.
✔ Verify mains stability or use a UPS during flashing.
✔ Keep the original dump on two different media.

Avoid
✘ Flashing a “close” model hoping it will work.
✘ Renaming random BIN files to upgrade_mb170.bin – signature check will fail.
✘ Interrupting power – will destroy the GPT and force full ISP recovery.

Potential challenges & work-arounds
• “USB not detected” – try smaller 4 GB USB2.0 stick, rear port only.
• “Turns on, then off in 2 s” – panel mismatch; obtain firmware with correct timing block.
• eMMC worn-out (common after 3-4 years heavy usage) – replace with new 8 GB Samsung/Kioxia, preload with correct image via programmer.

Possible disclaimers or additional notes

  • Some 2022+ models labelled “17MB170E” require an encrypted vestel_update.pkg plus a USB licence dongle; end-users cannot flash these without ASC access.
  • If the TV is under warranty, any non-authorised flash voids coverage.
  • There are counterfeit firmware packages carrying malware or adware. Always hash-check against a technician-verified copy.

Suggestions for further research

• Read “17MB170 Android Service Manual” (Plaisio 2024 release, free PDF) – explains partition map, UART commands.
• Forum threads:

  • Elektroda topic 4107837 (FU FLA4320UH, 17MB170) – shows panel-code pitfalls.
  • BadCaps thread 89851 (Hitachi 43HAE4251) – cross-flashing 17MB171 ↔ 170 and fixing LVDS settings.
    • Tools: open-source mtkclient for dumping / flashing MT5581 via UART.
    • Academic papers on eMMC wear in smart-TVs – predict failure patterns, helpful for preventive maintenance.

Brief summary

There is no single, safe “43-inch 17MB170 firmware”.
Identify: brand + commercial model + panel code → request the exact signed BIN/IMI from Vestel/OEM or a vetted technician forum.
Flash only when you have a verified match, using the USB-OK recovery procedure, constant power and a full back-up.
If you provide the precise model and panel details, I can help you locate the correct package or point you to an authorised download.

User question

which mother board uses JVC LT-43VA3000

Artificial Intelligence Response

Direct answer to the question

• The JVC LT-43VA3000 is built on the Vestel “17MB170” chassis (main board family).
• Within JVC’s spare-part catalogue the same board is usually ordered under the service part number “23764889” (and occasionally other 23xxxxxx Vestel codes that differ only in pre-loaded firmware/panel data).
• Always confirm the exact hardware revision printed on the PCB itself (e.g. 17MB170-0/-1/-2/-E) before buying a replacement or loading firmware.

Detailed problem analysis

  1. Manufacturing background
    • For the European market JVC TVs are OEM-manufactured by Vestel A.Ş. (Turkey). Vestel uses a modular platform strategy: every smart-TV main board carries a “17MBxxx” identifier silkscreened on the PCB.
    • “VA” in the model code (LT-43VA3000) denotes an Android-TV series – in Vestel nomenclature that maps to the 17MB170 family introduced in 2019 for UHD/4 K sets from 40 – 65 inch.

  2. Hardware overview – 17MB170
    • SoC: MediaTek MT5581 / MT5893 (Quad ARM-A53 + Mali GPU, 4 K 60 Hz HEVC/VP9 decode, Android TV 7-9).
    • RAM: 1.5 – 2 GB DDR3/4.
    • eMMC: 8 GB (holds bootloader, Android, panel data).
    • Tuners: DVB-T/T2/C and DVB-S/S2 on European variants.
    • I/O: 4 × HDMI 2.0 (CEC/ARC), 2 × USB 2.0, CI+, optical audio, Wi-Fi + BT combo, RJ-45.
    • Power interface: separate PSU board; standby 0.5 W typical.
    • Display timing, back-light drive and EDID tables are stored in the main board firmware and differ by panel code.

  3. Board revisions you may encounter
    ─ 17MB170-0 Early production; discrete Wi-Fi module.
    ─ 17MB170-1/-2 Minor regulator & tuner BOM tweaks.
    ─ 17MB170-E Conformal-coated export version (encrypted “IMI” firmware package).
    In practice the PCB layout is 99 % identical; the critical difference is the pre-programmed firmware and the white label Vestel p/n (e.g. 23764889).

  4. Relation between Vestel and JVC part numbers
    Vestel service part ↔ OEM label on board
    • 23764889 → 17MB170-1 programmed for panel PT430GT01-8 (commonly fitted in LT-43VA3000).
    • Other codes (23152xxx, 23601xxx, …) exist for different panel or tuner options; they are not drop-in compatible unless re-flashed.

  5. Why physical verification matters
    Firmware (“upgrade_mb170.bin”) includes:
    • Panel timing tables (TCON drive),
    • EDID, gamma & white-point data,
    • Audio amplifier parameters.
    Loading firmware compiled for a different panel (e.g. for VES430QNDL when your TV carries PT430GT01-8) will result in black screen, wrong colours or no back-light. Therefore technicians always read:
    a) Board silkscreen (17MB170-x)
    b) Vestel p/n sticker (23xxxxxx)
    c) Panel sticker (VES…, PT…, LC…) before sourcing parts or software.

Current information and trends

• Vestel continues to evolve the Android line-up; the 17MB220 and 17MB225 boards (Android 10/11) supersede 17MB170 in 2022-23 models.
• Component shortage has driven price volatility; identical boards with different branding (Hitachi, Sharp, Toshiba) can often be re-flashed for JVC use—provided you have SPI/eMMC tools and the correct binary.
• Secure-boot and warranty considerations are pushing manufacturers to lock new firmware packages to serial-number ranges, so future field repairs may require on-line authentication.

Supporting explanations and details

• Analogy: Think of the TV as a laptop—the main board (17MB170) is the motherboard, the panel code is equivalent to the display model, and the Vestel 23xxxxxx label is the laptop manufacturer’s part number loaded with custom BIOS.
• Example label photo (typical):
– Silkscreen near HDMI “17MB170-2”.
– White sticker: “VESTEL 23764889 / SW: JVC_LT-43VA3000_01.12.50”.
• Service-menu path to read panel code without opening set:
Remote → “Menu” > “0 0 0 0” > “Panel” (works only if TV still boots).

Ethical and legal aspects

• Firmware images are copyright Vestel/JVC; redistribution without permission is illegal in most jurisdictions.
• Flashing wrong firmware may irreversibly brick the eMMC and void CE-safety certification.

Practical guidelines

Replacement procedure (summary):

  1. Disconnect mains, remove stand & rear cover (≈ 19 screws).
  2. Photograph every label.
  3. If replacing board: transfer Wi-Fi/BT antenna leads and IR sensor harness exactly as routed.
  4. If re-writing firmware:
    ‑ FAT32 USB ≤ 8 GB → copy “upgrade_mb170.bin”.
    ‑ Insert USB in service port, hold OK on remote, plug in TV.
    ‑ Wait LED rapid-flash → auto-reboot (5-10 min).
  5. Always keep original eMMC dump with RT809H or CH341 before experimenting.

Common pitfalls & fixes:
• BOOT LOOP on JVC logo → eMMC corrupt → reflash or replace IC.
• No back-light after update → wrong panel selection → reload correct build.

Possible disclaimers or additional notes

• Some early LT-43VA3000 units shipped with 17MB130 prototype boards during pilot run; this is rare (< 1 %). Open the set if unsure.
• Vestel occasionally bundles main board + T-Con on one PCB for 50 / 55 inch variants—43″ variant keeps discrete T-Con on panel.

Suggestions for further research

• Investigate SPI-NOR vs eMMC pin-out on 17MB170 for low-level recovery.
• Compare power-efficiency and SoC thermal behaviour between 17MB170 and newer 17MB220 under Android TV 11.
• Monitor Vestel’s transition to Google TV middleware and its impact on board design.

Brief summary

The JVC LT-43VA3000 is a Vestel-built 43″ Android 4 K TV. Its electronics centre around the Vestel 17MB170 main board, which JVC services reference as part number 23764889. Always match the exact board revision and panel code before sourcing a replacement board or firmware to avoid incompatibility or damage.

Ask additional question

Wait...(2min)
Disclaimer: The responses provided by artificial intelligence (language model) may be inaccurate and misleading. Elektroda is not responsible for the accuracy, reliability, or completeness of the presented information. All responses should be verified by the user.
Report illegal content (Article 16 DSA)