FirstChip FC1178BC USB2DISK VID FFFF PID 1201 Firmware Recovery for Intel QLC 1GB

User question

Description: [D:]USB Mass Storage Device(NAND USB2DISK)
Device Type: Mass Storage Device

Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA

USB Device ID: VID = FFFF PID = 1201

Device Revision: 0000

Manufacturer: NAND
Product Model: USB2DISK
Product Revision: 0.00

Controller Vendor: FirstChip
Controller Part-Number: FC1178BC
Flash ID code: 89D3AC32C600 - Intel - 1CE/Single Channel [QLC] -> Total Capacity = 1GB

Tools on web: http://dl.mydigit.net/search/?type=all&q=FC1178BC

Artificial Intelligence Response

Direct answer to the question

• Your stick is in the FirstChip ROM/boot mode (VID = FFFF, PID = 1201, strings “NAND/USB2DISK”). To make it work again you must re‑initialize the controller with a FirstChip Mass‑Production Tool (MPTool) build that supports FC1178BC and your NAND ID. This process is destructive and will erase all data. (elektroda.com)
• The Flash ID 89 D3 AC 32 C6 00 maps to Intel/Solidigm PF29F01T2ALCQK1, a 3D‑QLC, single‑CE die (≈1024 Gbit ≈ 128 GB). The “Total Capacity = 1 GB” readout is a tool misinterpretation often seen when the controller is in ROM mode or the flash table is missing. (flashinfo.top)
• Known, community‑vetted MPTools: FC1178/FC1179 MpTools V1.0.5.2 (2022‑06‑01), and newer FC1179 MpTools V1.0.7.2 (2024‑02‑21). Start with the newest build that still recognizes FC1178BC; fall back if your Flash ID isn’t in the bundled database. (usbdev.ru)

Detailed problem analysis

• Why the stick shows FFFF:1201 and “USB2DISK”
  • FirstChip controllers boot from mask ROM; if the external firmware/FTL in NAND is missing or corrupt, the ROM enumerates with fallback descriptors (USB 2.0 HS, MaxPower 100 mA, VID FFFF, PID 1201, strings “NAND/USB2DISK”) and waits for the MPTool to download a temporary firmware over control endpoint EP0. (elektroda.com)
  • Common triggers: interrupted “factory format,” power loss during writes, counterfeit capacity overfill, or NAND wear in the firmware blocks. (elektroda.com)
• Your NAND Flash ID and the “1 GB” confusion
  • Byte 0x89 = Intel manufacturer code; extended ID 89 D3 AC 32 C6 00 is catalogued for Intel PF29F01T2ALCQK1 (3D QLC, 1 CE). Community flash‑ID databases and controller logs show this ID as ≈1024 Gbit per die. A 1 GB capacity report from generic scanners is therefore not credible in this context. (flashinfo.top)
  • In ROM mode, many utilities guess capacity from a minimal/placeholder table (or from a failed read), producing “1 GB” or “0 GB.” The correct capacity will only be established after a full low‑level scan with a matching MPTool flash‑table. (elektroda.com)
• Controller/tooling landscape (current)
  • FC1178/FC1179 combined tools up to V1.0.5.2 (2022‑06‑01) are widely used for FC1178BC. A newer FC1179 branch V1.0.7.2 (2024‑02‑21) exists primarily for FC1179/FC2279 but is often tried when newer NAND tables are needed. Use the combined FC1178/FC1179 package first; try the 2024 branch only if it explicitly lists FC1178 support in its config. (usbdev.ru)
  • Reflashing restores the on‑board firmware, rebuilds the bad‑block map, and recreates user LUNs. This resets the translator; any existing data becomes unrecoverable by file‑level tools. If data matters, do not run MPTool—go chip‑off/lab first. (reddit.com)

Current information and trends

• Publicly mirrored packages
  • FC1178/FC1179 MpTools V1.0.5.2 dated June 1, 2022 on USBDev; FC1179 MpTools V1.0.7.2 dated February 21, 2024 (USBDev news confirms the 2024 drop). (usbdev.ru)
  • The mydigit.net index you cited is still a useful mirror/discussion hub for FirstChip tools and presets. Expect changing links and require hash checks. (elektroda.com)
• Market reality
  • Many give‑away sticks with FC11xx report FFFF:1201 after overfilling a spoofed capacity. After a proper mass‑production format they re‑enumerate with the real, smaller capacity. (usbdev.ru)

Supporting explanations and details

• Step‑by‑step (safe, generic workflow)
  1. Prepare a Windows 7/10 PC, rear‑panel USB 2.0 port (avoid hubs). Temporarily disable real‑time AV to prevent interference; these tools are low‑level and unsigned. Run as Administrator. (usbdev.ru)
  2. Obtain an FC1178/FC1179 MPTool bundle from a reputable archive. Verify the archive’s hash (MD5/SHA‑256) if published. (usbdev.ru)
  3. Launch the tool; insert only the target stick. It should occupy a slot showing FFFF:1201.
  4. Enter Settings/Parameters (commonly blank password or “320”; some builds use “FCMP” or “123456”). If present, switch UI language to English. (usbdev.ru)
  5. Flash tab: let the tool auto‑scan. Confirm your Flash ID (89 D3 AC 32 C6 00) is recognized. Do not hand‑enter geometry unless the tool fails to detect. (usbdev.ru)
  6. Format/Scan: start with a full/“factory” scan (often called Scan Level 4 or “Clear + Factory scan”). This erases, re‑maps bad blocks, writes firmware and builds the FTL. (elektroda.com)
  7. On PASS, safely replug. Windows should now show the real capacity. Immediately verify the device with H2testw/F3 to ensure integrity. If verification fails or capacity collapses, retire the device. (elektroda.com)
• Version selection tips
  • If the 2022 combined tool (V1.0.5.2) reports “Flash ID not found,” try a newer branch only if it lists FC1178/BC support; otherwise step through older FC1178BC‑specific builds. Each package ships a different flash‑ID database, which is often the deciding factor. (usbdev.ru)
• Forcing/retaining ROM mode
  • If the stick stops showing FFFF:1201 mid‑experiments, many FirstChip PCBs have an ISP pad to force ROM mode. Use only if you know the test‑point; otherwise, avoid risky shorts. (elektroda.com)
• About the “1 GB” readout you saw
  • Multiple field reports show the same Intel ID decoded as “1 GB” by generic readers while controller OEM tools see 1024 Gbit. Trust the MPTool’s flash table and a full low‑level scan to establish real size. (usbdev.ru)

Ethical and legal aspects

• Data: MPTool re‑initialization irreversibly destroys user data. If the contents matter, consult a professional NAND lab first. (reddit.com)
• Software: MPTools are proprietary factory utilities; most public copies are redistributed by communities. Use for personal repair; respect licensing if you are a commercial service. (elektroda.com)
• USB IDs: Do not program vendor/product IDs belonging to third parties. If you must alter descriptors, keep the defaults or use IDs assigned to you. Using someone else’s VID can cause OS conflicts and breaches USB‑IF policy. (General industry practice; no tool required.)

Practical guidelines

• Implementation checklist
  • Confirm controller (FC1178BC) via a detector you trust; your ChipGenius‑style dump is consistent with FirstChip ROM mode. (elektroda.com)
  • Prefer the FC1178/FC1179 combined tool V1.0.5.2 first; if your NAND isn’t recognized, test a carefully selected newer package with documented FC1178 support. Keep logs of errors. (usbdev.ru)
  • Use a stable USB 2.0 port; avoid hubs/laptop front ports; keep other mass‑storage unplugged during production format. (usbdev.ru)
  • After PASS, validate with H2testw/F3 (write/read full capacity). Any mismatch indicates either failing NAND or a spoofed device—retire it. (elektroda.com)
• Typical failure modes and actions
  • “Flash ID not found/unknown”: the build’s flash table lacks your ID—try adjacent builds or a package clearly listing Intel 89D3AC32C6. (usbdev.ru)
  • “Too many bad blocks/No Media”: physical NAND wear or bus issues—no software fix; consider professional recovery or replacement. (elektroda.com)

Possible disclaimers or additional notes

• Not all FC1179‑era tools include FC1178BC; read the package notes. If none of the public builds recognize your ID, the stick may use non‑standard wiring or the NAND may be defective. (usbdev.ru)
• Antivirus false positives around MPTools and detector utilities are common; use an isolated host and verify hashes before running. (reddit.com)

Suggestions for further research

• Where to look next
  • USBDev.ru “Files → FirstChip” (historical and current MPTool builds, change logs); FlashBoot/USBDev news entries to spot newer releases; mydigit.net threads for FC1178BC presets and parameters. (usbdev.ru)
  • Flash‑ID catalogues (e.g., flashinfo.top) to cross‑check ID→geometry mappings when the tool database is missing entries. (flashinfo.top)
• If data matters
  • Read up on chip‑off procedures or consult a lab that supports FirstChip NAND (PC‑3000 Flash/VNR). Running MPTool before imaging will make file‑level recovery impossible. (reddit.com)

Brief summary

• Your device is a FirstChip‑based USB stick stuck in ROM mode; it must be re‑initialized with a matching FirstChip MPTool. The Intel Flash ID you reported corresponds to a large 3D‑QLC die; the “1 GB” capacity shown by your reader is not reliable in this state. Use an FC1178/FC1179 MPTool build (start with 2022‑06‑01; try newer only if it lists FC1178 support), run a full low‑level scan/format, and then verify capacity with H2testw/F3. All data will be lost in the process. (usbdev.ru)

If you want, tell me whether you need data recovery (yes/no). If no, I can walk you through the exact MPTool screens and options for FC1178BC and your Intel 89D3AC32C6 ID. If yes, stop here and I’ll outline a non‑destructive imaging path.

Disclaimer: The responses provided by artificial intelligence (language model) may be inaccurate and misleading. Elektroda is not responsible for the accuracy, reliability, or completeness of the presented information. All responses should be verified by the user.