Artificial Intelligence Response
Direct answer to the question
To charge a Bose SoundLink speaker, plug the correct charging cable into the speaker’s charging port, then connect the other end to a USB wall charger, computer USB port, or power bank. The exact cable depends on the SoundLink model:
| SoundLink model type |
Charging connector |
| SoundLink Flex, newer SoundLink models |
USB-C |
| SoundLink Color II, Revolve/Revolve+, Micro, Mini II |
Micro-USB |
| SoundLink Mini 1st Gen, older SoundLink Mobile models |
Bose barrel-type power adapter / charging cradle |
If you are unsure which model you have, look at the port shape:
- USB-C: small oval, reversible.
- Micro-USB: small trapezoid shape, not reversible.
- Barrel jack: round DC power socket.
Detailed problem analysis
1. For newer USB-C Bose SoundLink speakers
Examples: SoundLink Flex, SoundLink Max, some newer SoundLink models.
- Locate the USB-C charging port.
- Plug a USB-C cable into the speaker.
- Connect the other end to a USB wall charger or power bank.
- Use a charger rated around 5 V, 1.5–3 A if available.
- The battery/power light usually blinks or pulses while charging and becomes solid when fully charged.
A normal phone charger is usually fine. A USB-C PD charger is also generally safe because the speaker will request the voltage/current it needs.
2. For micro-USB Bose SoundLink speakers
Examples: SoundLink Color II, SoundLink Revolve, SoundLink Revolve+, SoundLink Micro, SoundLink Mini II.
- Plug the micro-USB cable into the speaker’s charging port.
- Plug the USB end into a 5 V USB wall charger.
- Let it charge until the battery indicator shows full.
Typical indicator behavior:
- Blinking amber/orange: charging.
- Solid green or solid white: fully charged, depending on model.
For best results, use a USB charger rated at least 5 V / 1 A. A 2 A phone charger is usually suitable.
3. For Bose SoundLink Mini II with charging cradle
If you have the charging dock/cradle:
- Plug the micro-USB cable into the cradle.
- Connect the cable to the wall adapter.
- Place the speaker on the cradle, making sure the metal contacts align.
You can also charge many Mini II units directly through the micro-USB port.
4. Important note for SoundLink Mini 1st Generation
The original SoundLink Mini 1st Gen does not normally charge through micro-USB. It uses a Bose DC barrel power adapter and/or a charging cradle.
If your speaker has a micro-USB port but does not charge from it, it may be the Mini 1st Gen; that USB port was mainly for service/firmware use, not normal charging.
Practical guidelines
Use these best practices:
- Use a proper 5 V USB charger for USB-charging models.
- Avoid very weak computer USB ports if the speaker is deeply discharged.
- If the speaker is waterproof or water-resistant, make sure the charging port is completely dry before charging.
- Do not force the connector into the port.
- If the speaker has not been used for a long time, leave it connected to power for 10–30 minutes before trying to turn it on.
- If it does not charge, try:
- a different cable,
- a different wall charger,
- cleaning lint from the port carefully,
- connecting it to a computer and checking with the Bose updater.
Brief summary
Use the charging cable that matches your Bose SoundLink model:
- USB-C for newer models like SoundLink Flex.
- Micro-USB for many older portable models like Color II, Revolve, Micro, and Mini II.
- Bose barrel adapter/cradle for the original SoundLink Mini and older SoundLink Mobile speakers.
Plug it into a suitable charger, wait for the charging light to stop blinking or turn solid, and avoid charging if the port is wet.