Czy wolisz polską wersję strony elektroda?
Nie, dziękuję Przekieruj mnie tamhauwei b535-932 windows technician toolkit
• Huawei does not publish a single, public “Windows Technician Toolkit” for the B535-932.
• Authorised service centres use proprietary Huawei eService and Balong-based recovery tools; they are not legally downloadable for end users.
• For field engineers or advanced users on Windows, an effective “toolkit” is therefore an assembled set of:
– Official resources (router Web-UI, firmware packages, PDF service manuals).
– Generic Windows network utilities (Ping, ipconfig, netsh, Wireshark, PuTTY).
– Community/third-party tools (Huawei Router Tool, LTE-H Monitor, balong_usbdload, etc.) used with caution.
• Everything beyond the browser interface and official firmware flashes is unsupported and may void warranty or violate regional regulations.
Device overview
• B535-932 is an LTE Cat-7/300 Mb s CPE based on HiSilicon Balong 711/712.
• Management interfaces exposed:
– Web-UI (http://192.168.8.1) via HTTPS/REST.
– Hidden REST/JSON API (same endpoint, token-based).
– Balong USB emergency loader (factory only, accessible by shorting test points).
– UART on PCB for console (115 200 bps).
• No public COM-port/PC UI interface by default; USB socket is mass-storage/NAS only.
What an engineer typically needs to do under Windows
a) Routine tasks
– Upgrade or downgrade firmware / WebUI packages.
– Collect signal metrics (RSRP, RSRQ, SINR) to optimise antenna placement.
– Change APN, lock LTE band, configure bridge/DMZ, export logs.
b) Advanced / service-level tasks
– Restore a soft-bricked unit (Balong USB Loader).
– Re-write IMEI or MAC after main-board swap (service only).
– Perform full RF test/calibration (factory only).
Components of an unofficial Windows “toolkit”
A. Official Huawei software
• Firmware images (“.bin” or “.exe” bundles) – accessible on consumer site for your region or on enterprise portal with account.
• HiLink/AI Life mobile app – useful only for end-users, not technicians on PC.
• eService Tool & Facility Test – NDA protected; available only to authorised ASPs.
B. Core Windows utilities
• cmd / PowerShell: ping, tracert, telnet, nslookup, netsh wlan show interfaces, certutil –urlcache –f.
• Wireshark: packet-level debugging of DHCP, DNS, PPPoE passthrough, etc.
• PuTTY or Tera Term: UART console if PCB header is exposed or for SSH if you enable dropbear via modified firmware.
C. Community / open-source tools (use at your own risk)
• Huawei Router Tool (Python, GitHub pearlxcore) – reads REST API, allows band/cell lock, reboots, SMS, traffic stats. Works on Windows after pip install -r requirements.txt.
• LTE-H Monitor (formerly E5186 Toolbox) – GUI, provides live RSRP graphing and hidden settings; partial B535 compatibility on some firmware lines.
• Balong_USBDload / Balong_Flash – CLI utilities used to push OEMLoader and factory firmware via USB-boot mode. Requires test-point short and Huawei 1.0.1.2 USB drivers.
• Easy-Firmware / HalabTech repositories – hold regional firmware/WebUI combos. Verify SHA-256; many packages are re-signed or modified.
• Open-source REST scripts (e.g., b535_bandlock.ps1, band_select.sh) – call /api/device/control etc.
D. Documentation
• User Manual (PDF ID: 905629).
• Service Manual & schematics – leaked copies exist, but distribution infringes Huawei copyright.
• LTE field-test references: 3GPP TS 36.101, 36.133 for interpreting RSRP/RSRQ.
Typical workflow example
B535-932-2.0.0.1(H325SP1C00).bin from Huawei support or operator mirror.ping –t 192.168.8.1 & ping –t 8.8.8.8. Loss only beyond CPE, so investigate RRC cell re-selection.ip.addr==192.168.8.1 && icmp – look for TTL expired loops.• Most B535 firmware lines in 2023–24 adopt HarmonyOS 3-based WebUI; remote-admin API is still Balong v2, so legacy tools continue to work.
• Operators increasingly disable band-lock endpoints; community responds with encrypted patchers (e.g., webui_fix.sh released Jan-2024 on 4PDA).
• Demand for bridge mode is high; some latest firmwares now expose “LAN-Only” under Internet → Connection.
• EU/UK security directives (EU 2019/881 Cybersecurity Act) push vendors to tighten bootloader unlock paths; expect future CPEs to use signed PER-device images – recovery flashing may become impossible without token.
• Balong emergency loader: the SoC enumerates as VID 0x12D1 PID 0x3609 in download mode. Windows driver Huawei USB Composite loader is required; WinUSB via Zadig also works.
• Band locking via REST:
POST /api/net/net-mode
<?xml version="1.0" encoding="UTF-8"?>
<request>
<NetworkMode>03</NetworkMode> <!-- 03 = LTE only -->
<NetworkBand>3FFFFFFF</NetworkBand>
<LTEBand>000000000000000004</LTEBand> <!-- bitmask B3 -->
</request>• When capturing radio metrics, remember:
RSRP > -80 dBm (excellent), RSRQ > -10 dB (good), SINR > 13 dB (good).
• Changing IMEI, removing SIM-lock, or flashing operator-restricted firmware may breach regional telecom law (e.g., UK Wireless Telegraphy Act 2006 §35).
• Distributing leaked Huawei service tools breaks NDA and copyright.
• Collecting signal data is legal; intercepting user traffic without consent is not (GDPR, CCPA).
• Follow IEC 62368-1 when opening device; internal Li-ion module and high-gain RF paths present hazards.
.xml) before upgrades. balong_usbdload B535-usbloader.bin.balong_flash –f B535-932-B UPDATE.APP. • Community tools lag behind new firmware; check GitHub issues for compatibility.
• Some operator firmwares (e.g., Telkom ZA) remove /api/device/control completely—band lock impossible.
• Emergency loader procedure risks permanent damage if wrong image or SoC revision mismatch.
• Monitor 3GPP Rel-17 RedCap and how future CPE chipsets may merge.
• Evaluate OpenWrt port status for B535 (work in progress, needs NAND driver).
• Investigate TR-069/TR-369 USP for remote fleet management instead of manual toolkit.
• Read Huawei security whitepaper “CPE Cyber Security Practice 2024”.
There is no publicly released “Windows Technician Toolkit” dedicated to the Huawei B535-932. Instead, engineers build their own kit comprising:
• Huawei-supplied firmware/web-UI packages and, for authorised partners, eService recovery tools.
• Standard Windows networking commands and packet sniffers.
• Open-source or community applications that talk to the router’s hidden REST API for band locking, log export and real-time metrics.
While these resources cover most diagnostic and maintenance needs, advanced flash or IMEI operations are restricted to authorised service centres, and any unofficial manipulation carries legal and technical risks.