To insert a picture on elektroda.pl forum, you must click on the "Add an image" button (shown in the picture below).
If you are using old layout click "Add an image"
After clicking on the "Add an image" will be displayed following window:
1) From local source: Click on button "Add an image". New window will be displayed, where you select images. Select files and click Open.
You can choose small or big thumbnail:
And also image alignment:
After selected images upload will start automatic and BBCode will be pasted to message editor automatic. You can also select and copy and paste BBCodes tags. Tags you can find below text "BBcode to paste into the post editor".
Instructions for inserting schematics on elektroda.pl
elektroda.pl has been integrated with the editor EasyEDA. EasyEDA is a free online editor, which allows you to create the schema, run simulations, to design a printed circuit board using only web browser. Now you can share with users own projects, you can make changes together, and after work boast the whole world, what you have created.
To post a diagram of EasyEDA, you need to go to a normal response window. Click the "Post reply" button at the top (picture left) or at the bottom of the page (image right) indicated by a red arrow on the pictures below.
After clicking on the button shown above, a normal response window will appear. To insert a diagram in the forum, click on the "Add a schema" (shown below).
After clicking on the button "Add a schema" in the new window automatically launch website http://easyeda.com/editor - online program designed to draw electrical schematics.
As soon as the page is displayed in the upper right corner will show a step-by-step tutorial, presenting what does each menu and each button schematic editor - to do so simply click on "Next" button indicated by a red arrow in the picture below.
If you don't need help tutorial, click on the "Skip" indicated by a red arrow in the picture below.
Draw a schema, and then click on the "Insert into elektroda" in the lower right corner of the picture indicated below by a red arrow.
A window shown below will appear, where you should enter the schema name and a brief description. Then click on the "Save" button.
After some time (usually a few seconds) you will be redirected to your post with the finished code which inserts a scheme. DO NOT MODIFY IT!
To see how it will look in the forum, click the "Preview" indicated by a red arrow in the image below.
To send an online post with reproduced schematics, just click on the "Submit" button indicated below by a red arrow.
Frequently Asked Questions:
Do I have to register in EasyEDA to share scheme for elektroda.pl? No, but remember - to manage your project you need to set up a free account.
Can I use circuit simulation and PCB layout without having an account on EasyEDA? Yes, the simulation can be used in anonymous mode, but you'll find that after logging this is more fun.
Why I can't find the button "Insert into elektroda"? Apparently you not opened EasyEDA through elektroda.pl.