Hello
I have uploaded the OpenBK7231N QIO 1.18.94 softwares into one of the plugins for a trial.
after uploading I switched my wifi to my network and everything works nicely.
Only after entering the plugin address I see
Voltage 0.1 V
Current 0.000 A
Power 0.01 W
Apparent Power 0.00 VA
Reactive Power 0.00 var
Power Factor 3598.55
Energy Total 0.000 kWh
the pin configuration is currently as follows
"6": "BL0937CF;0",
"7": "BL0937CF1;0",
"8": "BL0937SEL;0",
"24": "Rel;0",
"26": "Btn;0",
"28": "WifiLED;0"
What to do to make the plug detect the mains voltage and show the current consumption ?
----
Deleted from topic: [T34/BL0937] Abandoning a generic smart Wi-Fi plug with energy metering
by oki188 on 29 Apr 2025 23:51
I have uploaded the OpenBK7231N QIO 1.18.94 softwares into one of the plugins for a trial.
after uploading I switched my wifi to my network and everything works nicely.
Only after entering the plugin address I see
Voltage 0.1 V
Current 0.000 A
Power 0.01 W
Apparent Power 0.00 VA
Reactive Power 0.00 var
Power Factor 3598.55
Energy Total 0.000 kWh
the pin configuration is currently as follows
"6": "BL0937CF;0",
"7": "BL0937CF1;0",
"8": "BL0937SEL;0",
"24": "Rel;0",
"26": "Btn;0",
"28": "WifiLED;0"
What to do to make the plug detect the mains voltage and show the current consumption ?
----
Deleted from topic: [T34/BL0937] Abandoning a generic smart Wi-Fi plug with energy metering
by oki188 on 29 Apr 2025 23:51
