The difference between a D-latch and an edge-triggered D-type flip-flop is that the latch:
A)
is controlled by the logic level at its ENABLE input rather than a CLK transition.
B)
always "latches" the Q output to the D input regardless of other inputs.
C)
triggers on either the rising or falling edge of an ENABLE signal rather than the CLK input logic level.
Thanks
A)
is controlled by the logic level at its ENABLE input rather than a CLK transition.
B)
always "latches" the Q output to the D input regardless of other inputs.
C)
triggers on either the rising or falling edge of an ENABLE signal rather than the CLK input logic level.
Thanks
