digital energy meter programming

sir,
i downloded a project on digital energy meter,the c programming which was given by this side,when i tried to convert the c programming into hex code in MPLAB IDE they show a error,,,for that plzz tell me the orginal programing

DID You compile the C code
Did you set up the correct enviroment inside MPLABS after doing this you can then view the hex code which is the result of the compile and then look at the assembler


PS you can download a cutdown version for windows from
This is available from
Scource Boost .com

http://www.sourceboost.com/Products/BoostC/Overview.html (good compiler this very good ) Also available from Maplins

Or have a look at codeblocks very good this I tried this yesterday (This is free by the way )

http://www.codeblocks.org/downloads

You need mingw installed for windows first available from

http://sourceforge.net/projects/mingw/files/

Also

SDCC,
http://sdcc.sourceforge.net/index.php#Platforms

And

GPUTILS
http://sourceforge.net/projects/gputils/files/

Also I suggest that you download and install the following before attempting to compile

Winpic
Available from

http://www.winpic800.com//index.php?option=com_content&task=blogcategory&id=18&Itemid=64

Mark

All if not any of the above before you can even think about viewing ASM files in MPLabs

www.harrington.force9.co.uk