Arduino to VGA Display Interface: Methods, C Code, and D-A Conversion Explained

Thought this might interest you regards how to interface arduino to VGA displays The article is quite intensive and requires that you have a good understanding of c , arrays , d-a conversion but discusses how you might interface to VGA ,

Just shows you this can be done hence camera to Arduino to lcd, vga is within reach



http://www.gammon.com.au/forum/?id=11608

Very cool article Mark. Nice to see such a simple interface.

With all the modern display standars like DVI and DisplayPort it's becoming more of a challenge to interface with modern displays. But then again, we have products like the Raspberry Pi (semi-open) that make this possible. Though not without a boatload of software to make it happen.

Thanks for sharing...

Here is our project where we push arduino data onto the vga monitor - "http://arduinotronics.blogspot.com/2012/03/arduino-to-vga.html(arduino vga)":http://arduinotronics.blogspot.com/2012/03/arduino-to-vga.html

Full graphics and instant variable updates on a 800x600 full color output.

Hi Joe

Im having similar problems at the moment hdmi to vga etc

Pleasing news is I’ve just been doing some research on this and found some other interesting links on how to convert to different formats

See site below

https://sites.google.com/site/scidiy/pc-diy/hdmi-to-vga

Think you might find this interesting as well especially for Raspberry Pi model B

Have done some more research into this but from what Raspberry Pi are saying this wont work for some reason but i suppose no harm in trying so long as your not pulling current from the hdmi source with reference to the second article


See site below

https://sites.google.com/site/scidiy/pc-diy/hdmi-to-vga

Also make sure you read the notes on sd cards quite a few that throw errors need to be very carefull with this

http://elinux.org/RPi_SD_cards Looks as though if you make a mistake here it could be quite oracle orrible

Lots of notes also on how to get java to work on RPi
Make sure you read them thoroughly before you burn the Os on the SD card

See this link for more details

The key here is read thoroughly do once


https://blogs.oracle.com/hinkmond/entry/quickie_guide_getting_hard_float

It lookes as though with my relay board project interactive inet RPi I can at last conquer the world , he, he, he, My dreams for destroying the houses of parliament have finally been answered "Yes at last ! all at the touch of a button gosh how exciting "

Launch missiles one and two , big smilies !! ha , ha ,ha You is for it lol

http://itr8r.tumblr.com/post/31840231144/raspberry-pi-retaliation

Joking of course, I cant wait lol !! will we be able to beat Aghmed with RPI

This puts a whole new dimension to the "Art of war "
brundle fly has go nothing on this one



http://www.google.co.uk/url?sa=t&rct=j&q=aghm...DEEMGUA7Hlqa2Ka6ZZ01lAA&bvm=bv.41867550,d.ZG4