need to know because i’m new in electric and electronic engineering

hello friends ,

i just wanted to know about my problem :

i used female 4 pole connection that have (NO , NC , + , – ) that the problem is when i,m check the output it became 13 – 14 V , then later i’ll changed to the male 3 pole connection that have ( NO , + , – ) the output became 24 V.
Is it any possibilities?
can anyone help me and give me what is the different and is it good or not.
thanks.

To start with, tell us what kind of equipment you are working on, and what kind of power supply you are using, and attach a circuit diagram, and we will be able to understand your problem.

Question is not clear. Give circuit diagram or mention where it is used.

Its a fantastic forecast but I think , Sometimes I do this not often occasionally I get these notions ,

I think , ..... He’s working on either a mixer or an amplifier with balanced, unbalanced inputs with a phantom power supply for condenser microphones

That’s what it sounds like to me in other words looking into an XLR connector or out of one not quite sure

I’m just wondering if someone can supply me with a magical crystal ball so I can predict what’s in the future by the looks of things It doesn’t appear to be very good

Still not to worry perhaps if I ask Merlin he may be able to come with some fantastic spell that might solve this problem

He’s working on either a mixer or an amplifier with balanced, unbalanced inputs with a phantom power supply for condenser microphones

That’s what it sounds like to me in other words looking into an XLR connector or out of one not quite sure

I’m just wondering if someone can supply me with a magical crystal ball so I can predict what’s in the future, but by the looks of things It doesn’t appear to be very good for some of them It doesent look good at all Mr manering , not good at all

Still not to worry perhaps if I ask Merlin he may be able to come with some fantastic spell that might solve this problem , allowing me to project my vision into the area he is working on and anticipate his thoughts at the same time whilst retrieving this image of the equipment hes working on together with a complete fault finding diagnosis

It’s a bit like our dearly beloved manufactures at the moment with respect to service manuals , parts and could you just ….. I mean is it …. And why cant you ….. and could you just fix this in one minute without schematics etc and also , why do you need ….. Why cant you ….. without the other one thousand blairy pardons , and insanely stupid questions and answers


How many times do we get this ….. All the bloody time hence my extreme answers to some of them …. Not surprising they get walloped, thumped is it really??

Not surprising also that people do sincerely want to beat some of them to death

I can quite understand this cant you !!