At what voltage and current did the maker of this project probably used.

Reply | New topic

#1 21667602 13 Apr 2013 17:51

Floy Viola Floy Viola

Anonymous

Post #1
21667602 13 Apr 2013 17:51

am very much interested with this project since i will try to propose this to high school students this coming opening of classes this june. any inputs will be highly appreciated.

thanks

http://www.electronicproducts.com/Power_Produ..._it_yourself_using_some_wire_and_magnets.aspx
ADVERTISEMENT
#2 21667603 13 Apr 2013 20:01

Steve Lawson Steve Lawson

Anonymous

Post #2
21667603 13 Apr 2013 20:01

Don't know for sure, but this might give a clue:

* http://www.rmcybernetics.com/projects/DIY_Devices/diy-induction-heater.htm
#3 21667604 14 Apr 2013 10:25

Peter Evenhuis Peter Evenhuis

Anonymous

Post #3
21667604 14 Apr 2013 10:25

A few years ago i did a similar project/test and i used a small HF welding unit. it most be a type that has also a AC output and adjusted on 15 to 20 Amp.
And i used a cooper water pipe in a coil that i cooled internal by a slow flow of water.
Create an account, log in and become active in a forum and ads will not appear. You will receive points by participating in discussions.
Join this discussion.

Install Elektroda application

Didn't find an answer? Ask Artificial Intelligence

*I agree to send the question to OpenAI, Anthropic PBC, Perplexity AI, Inc., Kagi Inc., Google LLC - owners of language models in order to prepare the best response. The companies may monitor and log information entered into the form.

*I agree to publicly display my question and answer. The question and answer will be publicly available to everyone. The process may take a few minutes. Upon completion, you will be redirected to the page with the answer.

Wait...(2min)

Reply | New topic

Report a violation of the law

At what voltage and current did the maker of this project probably used.

Didn't find an answer? Ask Artificial Intelligence