Good day everyone.
I wonder if anyone can direct me please on the international standard number or name that explain the safety and standard procedures in better distribution of power in breakers and panels from transformers. In short, as I learned in my school and as best practice that when distributing loads on branches the following must be taken into account:
# The power supplies in each branch must be at least 20% more than the needed power required by equipment linked to this branch for safety reasons/
# The power amount remaining in any MV to LV transformer after connections must be at least 20% of the total transformer maximum capacity.
I would really appreciate if anyone can direct me to the exact standards that explain or mention this because I need to present it to our contractor who is building our facility.
Best regards,
Ibrahim
I wonder if anyone can direct me please on the international standard number or name that explain the safety and standard procedures in better distribution of power in breakers and panels from transformers. In short, as I learned in my school and as best practice that when distributing loads on branches the following must be taken into account:
# The power supplies in each branch must be at least 20% more than the needed power required by equipment linked to this branch for safety reasons/
# The power amount remaining in any MV to LV transformer after connections must be at least 20% of the total transformer maximum capacity.
I would really appreciate if anyone can direct me to the exact standards that explain or mention this because I need to present it to our contractor who is building our facility.
Best regards,
Ibrahim
