All the current e-cigs on the market use batteries and Im wanting to make something that either runs on alternating current, or convert to dc. The current mods run variable voltage ranging from 3.7vdc to 9.3vdc, and use batteries capable of 4.2vdc, 30 amp continuous 60 amp pulse. We usually run low ohm coils/heating elements usually between .2ohms and 1.8ohms.
What i want to do is get some sort of device that can regulate the voltage from a wall outlet between 4v-12v, have anywhere between 30-50 amps, 200-400 watts, and this obviously needs to be safe to use.
Im obviously not an electrician so there may not be enough details for someone to give a clear answer.
Thanks for any help!
What i want to do is get some sort of device that can regulate the voltage from a wall outlet between 4v-12v, have anywhere between 30-50 amps, 200-400 watts, and this obviously needs to be safe to use.
Im obviously not an electrician so there may not be enough details for someone to give a clear answer.
Thanks for any help!
