Meaning of Black Band at the End of a Resistor in Color Code System

What does the black band at the end of a resistor mean?

Hello,

Most resistor value is coded in 4 color band or 5 color band. For 5 color band resistor, the 5th ring indicates the tolerance value in percent. A black color has a tolerance value of 1%. Please refer to the attached link below for the reference. I hope this helps.

Link: http://www.ermicro.com/blog/?p=29

Regards,

Frank

The resistor shown appears to be:

Yellow Red Silver Gold Black

Is this correct ?
(Digital cameras and computer monitors can distort colours.)
(Resistor manufacturers sometimes use paint shades which are colour debatable !)
(Not to mention colour fading due to heat !)

───────────────────

Franklin, in all the other resistor charts I have ever seen throughout my life, a final brown indicates 1% tolerance. A final red indicates 2%.

https://en.wikipedia.org/wiki/Electronic_color_code

To be convinced about this, I would want to see a manufacturer's chart !