Orcad Entry Point Not Found Error When Launching Software – How to Fix?

66 6

#1 21675162 10 Jan 2016 06:26

santhoshkumar Damodaran santhoshkumar Damod...

Anonymous

Post #1
21675162 10 Jan 2016 06:26

Hi,

I have a problem when open the orcad software but it shows the Entry Point Not Found Error.Kindly give me a suggestion, here i attached the Error image.If i posted in wrong category kindly forward it to the right category.

Thanks & Regards,

Santhoshkumar.
ADVERTISEMENT
#2 21675163 11 Jan 2016 19:52

Kevin Angelo Ma Kevin Angelo Ma

Anonymous

Post #2
21675163 11 Jan 2016 19:52

Hi,

What OS are you using? I browsed through other forums, they said reinstalling it would fixed this problem.
ADVERTISEMENT
#3 21675164 11 Jan 2016 19:52

Kevin Angelo Ma Kevin Angelo Ma

Anonymous

Post #3
21675164 11 Jan 2016 19:52

Hi,

What OS are you using? I browsed through other forums, they said reinstalling it would fixed this problem.
ADVERTISEMENT
#4 21675165 12 Jan 2016 23:43

santhoshkumar Damodaran santhoshkumar Damod...

Anonymous

Post #4
21675165 12 Jan 2016 23:43

Thanks for reply,

I am using windows7,Is any other options to recover without reinstalling?
#5 21675166 13 Jan 2016 20:11

Kevin Angelo Ma Kevin Angelo Ma

Anonymous

Post #5
21675166 13 Jan 2016 20:11

Hi

Sorry for the late response. As I could see it, there is a missing file somewhere. And the most probable solution would be reinstalling it.
#6 21675167 14 Jan 2016 19:42

Kevin Angelo Ma Kevin Angelo Ma

Anonymous

Post #6
21675167 14 Jan 2016 19:42

Hi,

About your additional question, What do you mean? A bluetooth battery charging module? Or this is a separate one.

There are some from "NXP("")":http://www.eeweb.com/news/bluetooth-smart-soc-family/, you can check them out.
ADVERTISEMENT
#7 21675168 18 Jan 2016 23:40

santhoshkumar Damodaran santhoshkumar Damod...

Anonymous

Post #7
21675168 18 Jan 2016 23:40

Hi kevin,

Sorry for the late response,Actually am looking for a bluetooth module which is interfacing with micro controller though rs-232 communication. This whole set-up should work with battery it should be rechargeable. This is the first time am using bluetooth module.I don't have any idea about that, could you suggest any article regards.
Create an account, log in here. You will receive points by participating in discussions.
Join this discussion.

Install Elektroda application

Didn't find an answer? Ask Artificial Intelligence

*I agree to send the question to OpenAI, Anthropic PBC, Perplexity AI, Inc., Kagi Inc., Google LLC - owners of language models in order to prepare the best response. The companies may monitor and log information entered into the form.

*I agree to publicly display my question and answer. The question and answer will be publicly available to everyone. The process may take a few minutes. Upon completion, you will be redirected to the page with the answer.

Wait...(2min)

Topic summary

The discussion addresses an "Entry Point Not Found" error encountered when launching OrCAD software on a Windows 7 system. The primary cause is identified as a missing or corrupted file within the software installation. The recommended solution is to reinstall OrCAD to restore the missing components and resolve the error. Alternative recovery methods without reinstallation were queried but not provided. Additional unrelated queries about Bluetooth modules interfacing with microcontrollers via RS-232 and rechargeable battery operation were mentioned but not directly connected to the OrCAD issue.
Summary generated by the language model.

Home page
/
Forum
/
Circuit Design
/
EEWeb Topics
/
Orcad Entry Point Not Found Error When Launching Software – How to Fix?

Orcad Entry Point Not Found Error When Launching Software – How to Fix?

Didn't find an answer? Ask Artificial Intelligence

Topic summary