Connecting Panasonic Grid-EYE AMG8833 Sensor to Raspberry Pi B+ via I2C on Custom PCB

36 1

Report a violation of the law

Reply | New topic

#1 21676383 21 Aug 2016 12:57

Jorge Cantu Jorge Cantu

Anonymous

Post #1
21676383 21 Aug 2016 12:57

Hi everyone, I am trying to create a pcb in order to connect a raspberry pi b+ to a grid eye sensor by communicating through I2C. Could I essentially create a pcb like the one in the picture, except only concern myself with the P1 and P2 jumpers? Also I would ignore the PIC and other FX sun component. I have a little experience with this, but would love some tips or info if anyone has it
ADVERTISEMENT
#2 21676384 22 Aug 2016 18:36

Kevin Angelo Ma Kevin Angelo Ma

Anonymous

Post #2
21676384 22 Aug 2016 18:36

Hi,

There are various tools you can use that can found on the internet. PCB design is quite challenging if you have a very complicated circuit. For your case, if the circuit you want is something like that in the attached that would be somewhat take much space.

Here are some tools you can find, http://aa-pcbassembly.com/design-insights/pcb-cad-software/

https://www.youtube.com/watch?v=FDyx4kB0Ty4
Create an account, log in here. You will receive points by participating in discussions.
Join this discussion.

Install Elektroda application

Didn't find an answer? Ask Artificial Intelligence

*I agree to send the question to OpenAI, Anthropic PBC, Perplexity AI, Inc., Kagi Inc., Google LLC - owners of language models in order to prepare the best response. The companies may monitor and log information entered into the form.

*I agree to publicly display my question and answer. The question and answer will be publicly available to everyone. The process may take a few minutes. Upon completion, you will be redirected to the page with the answer.

Wait...(2min)

Reply | New topic

Report a violation of the law

Connecting Panasonic Grid-EYE AMG8833 Sensor to Raspberry Pi B+ via I2C on Custom PCB

Didn't find an answer? Ask Artificial Intelligence