I'd like to start a thread of educated thoughts and opinions of a topic that I am considering spending time and money on. Unfortunately, I do not have a very broad knowledge of the engineering intricacies of the topic. I'm really curious if there has been a proposal or workings of a vehicle that uses an electromagnetic field to transfer a power supply to common automotive loads. A car that functions normally without physical copper wire transmission of power. I'd like to spark some debates about how this would come to life if there already isn't a similar proposal. I am affluent in automotive technology, but nowhere near the level of engineer understanding it would take to tackle an idea like this. My inspiration sparked from the wireless phone charging. What I've read is that the voltage travels through the electromagnetic field that the pad creates into the phone battery. Here is a brief list of what I had in mind, if even possible:
Would there be any possible way of using the principals of the tesla coil (Transmission of high voltage/low current via electromagnetic field), but inverted (Car battery 12.6V/high amperage potential- average 600Amps via electromagnetic field)?
Would a BUS CAN system be implemented in such a way where each individual load can receive its own power supply through a unique path for the load? A similar example I thought of would be a radio translating frequencies into the noise that travels through the unique frequency value, but instead of noise being translated from the head unit-voltage and amperage.
I am very open to suggestions of any nature. Whether looking at other theories, or other websites or people to look toward for advice. Thank you very much for reading.
Would there be any possible way of using the principals of the tesla coil (Transmission of high voltage/low current via electromagnetic field), but inverted (Car battery 12.6V/high amperage potential- average 600Amps via electromagnetic field)?
Would a BUS CAN system be implemented in such a way where each individual load can receive its own power supply through a unique path for the load? A similar example I thought of would be a radio translating frequencies into the noise that travels through the unique frequency value, but instead of noise being translated from the head unit-voltage and amperage.
I am very open to suggestions of any nature. Whether looking at other theories, or other websites or people to look toward for advice. Thank you very much for reading.
