Tethered Drone Power: Using 230V AC to 12.5V DC, Capacitors, and Wire Gauge for 100ft

I have drone which was built by assembling all the drone essential requirements.
I have a battery which 5200 mah, 11.1v 35C. I think I can continuously fly the drone for 10-15 minutes.
Now I am thinking of another power source , which is tethered drone. I don't mind drone tethering
I have an idea in my mind to build the tethered drone. I am not sure whether it will work for me or not. Please help me on that.
On the Ground I use AC power supply which 230 volts and use some 14 - 22 gauge wire for 100 feet and at the drone end convert AC 230 volt to DC 12.5 volt. I mean some kind of adapter I will use. Now I am worried about is the amps which is required by the drone motor. I have a 180000uF 50V Electrolytic Capacitor which weighs about 700 grams. So when the capacitor gets charged from the source side and discharges at the other end.
Will the discharge side able to run the drone motors? Please help me on this.
And I also have some super capacitors, Can I use those capacitors.
I am providing you some link on the capacitors which I have already purchased.

https://www.electronicscomp.com/180000uf-50v-...rch=capacitor&sort=p.price&order=DESC

https://www.electronicscomp.com/1.5-farad-5.5v-super-capacitor?search=super%20capacitor

Hi

Personally I don't think your idea is a good or safe one. Mains voltages can kill so I wouldn't advocate trying to send such 100' into the air to a machine that could crash anywhere, to say nothing of the weight the drone would need to carry (cable to ground, AC/DC conversion etc).

Much easier and safer would be to convert the mains to a usable voltage on the ground using a AC/DC power module with a variable output and send the low voltage along the tether. You will need to take the voltage drop along the full length of the tether into consideration and the current too. Online calculators will tell you the voltage drop over a given size of wire.

That's how I would start anyway.

Good luck,
Regards

I suggest to have a look on https://www.eeweb.com/design-fundamentals-for-drone-motor-controller/ and https://www.eeweb.com/tethered-drones-improve-communications-and-surveillance/