logo elektroda
logo elektroda
X
logo elektroda

Where to find a 3-button push-button wall switch for garage door and gates?

damian_d 5371 7
ADVERTISEMENT
Treść została przetłumaczona polish » english Zobacz oryginalną wersję tematu
  • Seeking a three-button momentary wall switch

    #1 11126917
    damian_d
    Level 13  
    Posts: 136
    Help: 1
    Rate: 34
    Hello. My problem is as follows. I am looking for a 3-button pulse (doorbell) switch. I need it for my garage – more specifically, to control the automatic garage door, the main gate and the side gate. I’d like each of these functions to be connected to a separate button on the push-button switch. For example, I press one button and the garage door opens; I press it again and the door closes, and so on. Unfortunately, although it’s a good idea, I haven’t been able to find a 3-button push-button switch anywhere. So my question is: does anything like this even exist? The only things I’ve found are these: Link . Unfortunately, I’d be more interested in something like a normal light switch, but a pulsed one, rather than something like the items mentioned above. Thank you in advance for all your replies and for your help. Best regards.
  • ADVERTISEMENT
  • #2 11127369
    kasprzyk
    Electrician specialist
    Posts: 5595
    Help: 354
    Rate: 671
    Hello
    Have a look at the Legrand manufacturer – the Celiane range
    Best regards
  • ADVERTISEMENT
  • Clarifying voltage, junction box, and switch manufacturer options

    #3 11127372
    stkop
    Level 15  
    Posts: 121
    Help: 14
    Rate: 7
    Further details are required.
    Is it the 230V power supply that needs to be switched, or are you certain the signals are up to 24V?
    Is the junction box a standard one (60 mm diameter), or is there no junction box there yet, or can it be replaced?

    What springs to mind are VIMAR [special boxes] and NIKO [up to 24V].

    By the way, if anyone knows of manufacturers who offer a range beyond the standard catalogue for switches for 60 mm boxes (doorbell switches with more than 2 buttons), please do let me know. Such knowledge is a real asset in certain situations (especially in home automation).
  • ADVERTISEMENT
  • #4 11127407
    damian_d
    Level 13  
    Posts: 136
    Help: 1
    Rate: 34
    The gates are controlled by pulses and operate on a 24V circuit. The junction boxes have not yet been fitted.
  • #5 11127435
    stkop
    Level 15  
    Posts: 121
    Help: 14
    Rate: 7
    In that case, I suppose TEM would be the best option.
  • ADVERTISEMENT
  • #8 12606941
    TEM.POLSKA
    Level 2  
    Posts: 2
    damian_d wrote:
    Hello. My problem is as follows. I am looking for a 3-button pulse (doorbell) switch. I need it for my garage – more specifically, to control the automatic garage door, the main gate and the side gate. I’d like each of these functions to be connected to a separate button on the push-button switch. For example, I press one button and the garage door opens; I press it again and the door closes, and so on. Unfortunately, whilst it’s a good idea, I haven’t been able to find a 3-button push-button switch anywhere. So my question is: does anything like this even exist? The only things I’ve found are these: Link . Unfortunately, I’d be more interested in something like a normal light switch, but a pulse-type one, rather than something like the items mentioned above. Many thanks in advance for all your replies and for your help. Best regards.


    If you haven’t found anything like that yet, have a look at TEM Modul – they have modular installation kits for up to 7 buttons, so you’ll be able to add a few more if you like :)
    Where to find a 3-button push-button wall switch for garage door and gates? [/url]
    www.tem.com.pl :)

    Added after 9 [minutes]:

    Actually, I hadn’t noticed, but someone had already mentioned earlier that TEM would be the best solution... :)
ADVERTISEMENT