KNX, Promotic - Software for the visualisation and control of the KNX/EIB system

Hello, I have a question regarding the visualisation for the KNX/EIB system, namely can this visualisation be done with the Promotic program from Microsys? Alternatively, could you recommend a program for KNX visualisation? Woderware is out of the question because it is already taken - it is an engineering work.

Hello

You should probably be able to produce such a visualisation on the PROMATIC system.

You will probably need an additional OPC server, e.g. from the Matrikon company:

https://www.matrikonopc.com/opc-drivers/opc-knx/base-driver-details.aspx

As far as the implementation of engineering work is concerned, I recommend an interest in the ICONICS Genesis64 system. (there is a free fully functional version) to this, for example, the possibility of creating an interface for mobile devices.

YouTube:

https://www.youtube.com/watch?v=XPjCtX7Fqa0

Building Automation: https://www.youtube.com/watch?v=jIBRFoUDou4

Feel free to contact me on priv. - i can provide you with useful material for your thesis and show you a facility where a system for the visualisation and control of the KNX/EIB system has been physically implemented.

Regards
Marek