logo elektroda
logo elektroda
X
logo elektroda

How to use a bistable switch from Zamel Exta Free to control a pump?

majh 3825 1
ADVERTISEMENT
Treść została przetłumaczona polish » english Zobacz oryginalną wersję tematu
  • #1 14008708
    majh
    Level 2  
    Posts: 4
    Exta free offers the possibility of wireless communication. A monostable switch can be used with this system. As a bistable switch can be used in any way? Can some relay or other be added to make the bistable switch function like a monostable switch? .

    Maybe I am combining badly , maybe there is another solution ? I mean to switch on a pump in the well that fills an external tank 50 m away . There is a bistable float switch in the tank ( empty tank has power, full tank has no power)

    Of course, an extension cord takes care of this, but...
  • ADVERTISEMENT
  • #2 14109663
    majh
    Level 2  
    Posts: 4
    Here is the answer I received!

    Hello.
    In this case you should use:
    PZM-10 + RNP-01 - flooding detector + back-up transmitter
    http://www.zamel.pl/pl,67,378,przekaznik_zalania_pzm10.html
    http://www.zamel.pl/pl,222,3707,radiowy_nadajnik_dopuszkowy_4kanalowy_rnp01.html
    and receiver:
    ROP-01 http://www.zamel.pl/pl,223,3714,radiowy_odbiornik_dopuszkowy_1kanalowy_rop01.html
    or
    http://www.zamel.pl/pl,224,3723,gniazdo_zdalnie_sterowane_rwg01.html
    Greetings,
    Technical Support Department
    ZAMEL Sp. z o.o.
    zielona 27 Street
    43-200 Pszczyna, Poland
ADVERTISEMENT