Welcome
I would like to make led lighting in my house,
rbgw ribbons are an interesting solution.
However I have a big problem with the selection of the controller + possible remote control.
Namely I want smooth dimming of white diodes on RGBW tape.
Everywhere there are descriptions with the possibility of dimming RGB LEDs, but there is a general silence on the dimming of white LEDs.
I am interested in the following possibilities of the controller.
4 channel
wifi remote control (which remote control)
support of RGBW led strip (epistar5050) power of approx. 200W.
Simultaneous switching of RGB and White LEDs and the possibility of dimming (separately for White and separately for RGB)
alternatively
stepless regulation of the colour and dimming of the RGB LEDs
stepless adjustment of the dimming of the White LEDs
Dear colleagues, can you recommend anything, or at least a good shop in Poznan where there are dealers who know their stuff?
I am just learning about this technology, so if I have left any mistakes, please correct my amateurishness.
thank you in advance for your reply
kind regards
p.s. I used the search button about 10 times
I would like to make led lighting in my house,
rbgw ribbons are an interesting solution.
However I have a big problem with the selection of the controller + possible remote control.
Namely I want smooth dimming of white diodes on RGBW tape.
Everywhere there are descriptions with the possibility of dimming RGB LEDs, but there is a general silence on the dimming of white LEDs.
I am interested in the following possibilities of the controller.
4 channel
wifi remote control (which remote control)
support of RGBW led strip (epistar5050) power of approx. 200W.
Simultaneous switching of RGB and White LEDs and the possibility of dimming (separately for White and separately for RGB)
alternatively
stepless regulation of the colour and dimming of the RGB LEDs
stepless adjustment of the dimming of the White LEDs
Dear colleagues, can you recommend anything, or at least a good shop in Poznan where there are dealers who know their stuff?
I am just learning about this technology, so if I have left any mistakes, please correct my amateurishness.
thank you in advance for your reply
kind regards
p.s. I used the search button about 10 times
