logo elektroda
logo elektroda
X
logo elektroda
Advanced Search
logo elektroda

Huawei Y5 II Stuck on Logo: Hard Reset Solution and Avoiding Repeat Issues - Maciej Inquiry

Moan198513 4578 5
ADVERTISEMENT
Treść została przetłumaczona polish » english Zobacz oryginalną wersję tematu
Reply | New topic
  • #1 16248118
    Moan198513
    Level 2  
    Hello. I have a problem. Well, my Huawei Y5 II turns on and hangs on the logo. Nothing goes on. I have to do a hard reset to make it work. It is tiring because I can't let it discharge, because it will be over and over again Maciej ... I don't know what's going on. Can anyone help me? I don't know anything about it.
  • ADVERTISEMENT
  • Helpful post
    #2 16248257
    actin
    Level 34  
    Classic bootloop. It will help you download the software again
  • ADVERTISEMENT
  • #3 16248312
    Moan198513
    Level 2  
    All over again? So give it to the website? And why did this happen?
  • ADVERTISEMENT
  • Helpful post
    #4 16248591
    actin
    Level 34  
    If you have never done it and the phone is under warranty, give it to the service center.
    To be honest why nobody knows, there are a lot of reasons
  • ADVERTISEMENT
  • #5 16249773
    Moan198513
    Level 2  
    Thank you very much for your answer. Specifically and to the point. I wish you a nice day.
  • #6 16706226
    krecik10
    Level 10  
    I got this art of Y5 II, the phone is not flooded, at least nothing can be seen on the motherboard, the marker is also white, and the phone starts only to the inscription HUAWEi and restart, you can not enter the recovery mode pwr + vol +, or upload the software via dload with sd pwr vol- vol +, phone restart all the time.
Reply | New topic
Report a violation of the law
ADVERTISEMENT