Welcome, All People of Good Will!
And forgive me for the lame approach to the subject. My justification is that I am an old mushroom that has no idea about IT. I am an avid photographer dealing with this field for over 60 years. From my son, I got a drone "Mavic pro platinum" as a present and I can not check it because I write it as an informal cripple. I charged the batteries in the drone and in the controller, I removed the lock and gimbal protection, connected the cable from the controller to the phone (iPhone 7) turned on the driver and drone, turned on the phone, I selected the Wi-Fi network (Mavic-82aa9c) I entered the desired code ( Password - 0350 .....) and .... no connection. I also read from the instructions that you have to download and install the "DJI GO" application before using the drone. "Scan the QR code to download the latest version." I do not know how to do it? And here is a request to you that someone would help me and explain - what should I scan this code and how to download and install this application? I am asking for your understanding and translation in an extremely basic way, as you would explain it to your own grandfather and younger even your great-grandfather.
I would also like to explain that I first registered at the "Polish FPV Forum" but I have not been activated for more than 24 hours and I can not ask for anything and in addition they ironically say that in case of problems with activation, contact the website's adninistrator. Of course, without logging in, contact is impossible and the wheel closes. As you can see, you are the "last resort" for me.
And forgive me for the lame approach to the subject. My justification is that I am an old mushroom that has no idea about IT. I am an avid photographer dealing with this field for over 60 years. From my son, I got a drone "Mavic pro platinum" as a present and I can not check it because I write it as an informal cripple. I charged the batteries in the drone and in the controller, I removed the lock and gimbal protection, connected the cable from the controller to the phone (iPhone 7) turned on the driver and drone, turned on the phone, I selected the Wi-Fi network (Mavic-82aa9c) I entered the desired code ( Password - 0350 .....) and .... no connection. I also read from the instructions that you have to download and install the "DJI GO" application before using the drone. "Scan the QR code to download the latest version." I do not know how to do it? And here is a request to you that someone would help me and explain - what should I scan this code and how to download and install this application? I am asking for your understanding and translation in an extremely basic way, as you would explain it to your own grandfather and younger even your great-grandfather.
I would also like to explain that I first registered at the "Polish FPV Forum" but I have not been activated for more than 24 hours and I can not ask for anything and in addition they ironically say that in case of problems with activation, contact the website's adninistrator. Of course, without logging in, contact is impossible and the wheel closes. As you can see, you are the "last resort" for me.
