Hi
I have a standard battery of 9v and I want to feed an atmega8 microcontroller which accepts 5 v power in the vcc pin so should I use a resistor if 330 ohm to take down the voltage to pretty close to the desired voltage about 4.49 volts which is inferior to 5 v . What shoud I do to feed the atmega 8 microcontroller without damaging it
Thank you
I have a standard battery of 9v and I want to feed an atmega8 microcontroller which accepts 5 v power in the vcc pin so should I use a resistor if 330 ohm to take down the voltage to pretty close to the desired voltage about 4.49 volts which is inferior to 5 v . What shoud I do to feed the atmega 8 microcontroller without damaging it
Thank you
