Block diagram and explanation of phase-shift SSB detector for SSB signal recovery

I need to draw the block diagram of phase-shift SSB detector and then Explain the function of each block and at last Show how the message signal can be recovered from the detector when a SSB signal is applied to the input of the detector can any body help me please ???

Hi,
There is one type block diagram for SSB Demodulation for some application (PLC ), the modulated signal at first pass from A/D (sampling rate is related to for work frequency and Nyquist condition) for e.g in this model frequency for PLC is 40-400KHz , it mean sampling rate about 2.084MHz. and other in picture talk!!
but you can take idea from this picture and reverse application for modulation!

A single sideband (SSB) demodulation method is described, in which frequency mixing is not required. The proposed method is based on the phase shift method, but no local oscillator is employed. The IQ demodulator is replaced with an envelope detector and an FM demodulator. It can replace the synchronous demodulation method, which requires an expensive phase-locked loop for carrier recovery. Not only is less interference encountered in the proposed circuit, but the production costs of the SSB and independent sideband receiver are low. Furthermore, the Doppler effect is not a serious problem since the carrier transmitted by the transmitter is used for demodulation

Thanks!!!

The modulation method where only a single band of double sideband suppressed carrier modulation is transmitted is known simply as SSB. It offers even better electrical efficiency and frequency band efficiency than DSB. In addition, with digital modulation, modulation is performed at relatively low frequency, and this method is also used to up-convert the signal to a radio frequency. SSB-SC modulation can be achieved with various systems, but in terms of hardware
Thanks!!!