Why Does RC Parallel Circuit With Ideal Transformer in PSpice Differ From Direct RC Parallel?

Here is very simple question regarding R-L-C circuit. But I can not understand why the simulation results differed from my thought. Please share your wise brain with me.

Figure 1 shows two circuits simulated in PSpice. One is R-C parallel circuit connecting with an ideal transformer. Another is R-C parallel circuit without the the transformer. I think that the both circuit is same equivalently.

But if you don't think like me, please give me your explanation.

According to my simulation results in impedance point of view. Simulation result of top circuit (using the transformer) in Figure 1 is not same to the bottom one in Figure 1, but yielded a simulation result same to the result of a circuit of Figure 2.

In which point, I misunderstood? or Simulation has something wrong? Anybody help me?

Am I right to assume that both Figure 1 and 2 are basically identical circuits? Maybe you're seeing different results because the circuits (without transformers) in Figure 1 and 2 are not identical. In Fig. 1, you have two resistors connected in series, whereas in Fig. 2, the same resistor is connected in series with an inductor.