#1 21675956 25 May 2016 14:06 amr esam amr esam Anonymous Post #1 21675956 25 May 2016 14:06 i need to match the output of this circuit(1) to a 50 ohm, but i dont know the output impedance
#2 21675957 25 May 2016 19:42 Kevin Angelo Ma Kevin Angelo Ma Anonymous Post #2 21675957 25 May 2016 19:42 Hi,Kindly look about this article. This might help a little. https://www.pdx.edu/nanogroup/sites/www.pdx.e...group/files/2013_Input_output_impedance_9.pdf
#3 21675958 27 May 2016 09:29 amr esam amr esam Anonymous Post #3 21675958 27 May 2016 09:29 thanks KEVIN .
#4 21675959 17 Aug 2016 11:50 Randall Ferreto Randall Ferreto Anonymous Post #4 21675959 17 Aug 2016 11:50 Hi Amr.i have done this circuit before, the impedance is about 1.5 k to 2k ohm, you should use a LC network to match it to 50 ohm or better a transformer in the coil of the collector with a relation 10:1
