Identifying Tilt Sensor on Drone Circuit Board and Disabling While Maintaining Function

Report a violation of the law

Reply | New topic

#1 21677097 08 Mar 2017 23:51

David Henry David Henry

Anonymous

Post #1
21677097 08 Mar 2017 23:51

I attached a photo of a drone circuit board. Which component is the tilt sensor, and how can I disable it while still allowing the drone to function? Thank you.
ADVERTISEMENT
#2 21677098 09 Mar 2017 13:34

richard gabric richard gabric

Anonymous

Post #2
21677098 09 Mar 2017 13:34

Can't get a part number off the IC's in the photo, so can't say, it will be one of the square packages. Normally, drones rely on anything from a 6 to 10 DOF chip to get the information required to keep the drone stable, pitch and roll are the components you are interested in. Unless you have the source code for the drone controller, you are not likely to be able to change anything, and doing so will likely result in flight instability,
cheers,
Richard
#3 21677099 09 Mar 2017 20:21

David Henry David Henry

Anonymous

Post #3
21677099 09 Mar 2017 20:21

Great, thanks for your help Richard. I appreciate it.

David
Create an account, log in here. You will receive points by participating in discussions.
Join this discussion.

Install Elektroda application

Didn't find an answer? Ask Artificial Intelligence

*I agree to send the question to OpenAI, Anthropic PBC, Perplexity AI, Inc., Kagi Inc., Google LLC - owners of language models in order to prepare the best response. The companies may monitor and log information entered into the form.

*I agree to publicly display my question and answer. The question and answer will be publicly available to everyone. The process may take a few minutes. Upon completion, you will be redirected to the page with the answer.

Wait...(2min)

Reply | New topic

Report a violation of the law

Identifying Tilt Sensor on Drone Circuit Board and Disabling While Maintaining Function

Didn't find an answer? Ask Artificial Intelligence