IEC 60815 Subclause 5.3 kD Correction Factor Value for Creepage Distance Calculation

Report a violation of the law

Reply | New topic

#1 21677437 12 May 2017 22:05

Gladys Dematera Gladys Dematera

Anonymous

Post #1
21677437 12 May 2017 22:05

Hi,

Can anybody share what is written in IEC 60815 Subclause 5.3 (influence of the diameter).

I am looking for the value of correction factor due to diameter (kD) in the following formula:

It = a x If x Vr x kD

I dont have a copy of IEC 60815 so I cannot complete my calculation for creepage distances for high voltage.

Thanks
ADVERTISEMENT
#2 21677438 13 May 2017 01:11

Kevin Angelo Ma Kevin Angelo Ma

Anonymous

Post #2
21677438 13 May 2017 01:11

Check this "reference("")":http://clumb.free.fr/WG11/docs/public/Mannheim15.PDF . I also don't have the IEC material so I'm afraid thats all I can help...
ADVERTISEMENT
#3 21677439 15 May 2017 21:25

Sambath Kumar Sambath Kumar

Anonymous

Post #3
21677439 15 May 2017 21:25

Hi Gladys Dematera,

Pl see my attached file for your ref
ADVERTISEMENT
#4 21677440 17 May 2017 21:44

Aloce Jorsen Aloce Jorsen

Anonymous

Post #4
21677440 17 May 2017 21:44

Teach us more in this field. After reading on here, we can learn more from this topic.
#5 21677441 18 May 2017 21:47

Sambath Kumar Sambath Kumar

Anonymous

Post #5
21677441 18 May 2017 21:47

Hi, ALOCE JORSEN ,

google Calculating Creepage and Clearance Early Avoids Design Problems Late

these files are more than 10 MB So pl google it and review my rating. I am busy with an urgent project work. Good luck.
Create an account, log in here. You will receive points by participating in discussions.
Join this discussion.

Install Elektroda application

Didn't find an answer? Ask Artificial Intelligence

*I agree to send the question to OpenAI, Anthropic PBC, Perplexity AI, Inc., Kagi Inc., Google LLC - owners of language models in order to prepare the best response. The companies may monitor and log information entered into the form.

*I agree to publicly display my question and answer. The question and answer will be publicly available to everyone. The process may take a few minutes. Upon completion, you will be redirected to the page with the answer.

Wait...(2min)

Reply | New topic

Report a violation of the law

IEC 60815 Subclause 5.3 kD Correction Factor Value for Creepage Distance Calculation

Didn't find an answer? Ask Artificial Intelligence