Wiring dsPIC33EP and ADS1115 I2C Mini Module for 4-20mA Pressure Sensor Reading

The all new Digital dsPIC33EP seems to deliver the performance to more sophisticated non-linear, predictive, and adaptive control algorithms at higher switching, I need suggestions regarding wiring connections with 4-20mA current loop receivers to monitor the readings of Analog pressure sensor, Your Intel will be very helpful

RobsonIf I understand you correctly, you are asking how to interconnect the dsPIC33EP with the ADS1115. I am assuming that there is no question about connecting the analog pressure sensor.I have never used either, but it seems fairly obvious unless I am missing something. The ADS1115 page you referred to has the statement "NCD I2C devices use standard I2C communications for all data transport, which is supported by nearly every microcontroller in production today.  "From the  dsPIC33EP data sheet it lists as a feature"Two I2C™ modules (up to 1 Mbaud) " . So it appears that I2C is the interface to use. Is that what you were asking?

Don't forget the pullup resistors on both the I2C clock and data lines.  That's the most common problem getting I2C working.
-Rick