#1 21679759 16 May 2018 08:57 Ryan Switala Ryan Switala Anonymous Post #1 21679759 16 May 2018 08:57 This is a board off that triggers a small Servo from a remote. Is there a way to add a switch into this board? All I know is it is 3.7 volts thanks Attachments: forums-a6378d89-ebba-4f1a-bfbc-9aa606f95d92.jpeg Download (413.4 KB) forums-94612ab4-0785-4ebb-b278-392dd5d3c4b1.jpeg Download (1.29 MB)
#2 21679760 18 May 2018 20:57 Elizabeth Simon Elizabeth Simon Anonymous Post #2 21679760 18 May 2018 20:57 What do you want the switch to do? It looks like a 2 sided board so it should be possible to cut traces to add a switch. If you just want an On/off switch, it would be easier to add it in the wire from the battery (the red wire I think)
