How to Get Output and Understand Operation of STEVAL-IME013V1 Ultrasound Transmitter Kit

HI every one,
is there anybody to help me out on working of STEVAL-IME013V1 ultrasound transmitter kit.
I read data sheet but i didnt get any information. So I request you to please help me how to get output from that kit by explaining working.
thanks

Venkata,
Since this is an evaluation board, you will also need the data sheets for the main components. The STHV800 appears to be the main one but it may be useful to also look at the STM32.
From the data sheet that you have, it appears that you need multiple power supplies to make it work. In section 3.1 it mentions the 5V connection through USB but only for programming. Then +5V, -5V, Ground and some kind of positive and negative HV voltage that is not specified.The tables in section 3.3 have a mention of HV of +/- 60V or +/-10V  along with a specified load for the pre-stored programs.
Table 5 in section 3.5 gives minimum and maximum supply voltages.
So you first need to get all the right supply voltages and then you should be able to see the demo programs run. For anything more complicated, you will have to read the data sheet for the part.

لوله بازکنی ,تخلیه چاه , حفر چاه , لایروبی چاهthanks