Hi,
Im going to wind an tapped toroid inductor for a LCR circuit in an equalizer.
I have calculated the number of turns i need for each winding.
This is my first time winding an inductor so i need to get some things straight.
Im confused about the bandwith tap, how should i wind this on, just one turn to the core?
Also the 10 KHz tap, should i twist a wire with the 12 KHz tap in
order to have two taps with 31.4 mH?
Info:
Core type MPP
OD 39.90mm
ID 24.1mm
HT 14.5mm
AL value: 740 +/- 8% (nH)
MPP Permeability: 550 (μ)
Wire gauge: 34AWG
16 KHz - 29.9 mH 194.851 turns
Wire lengh 8.829m
12 KHz - 31.4 mH add 4.827 turns
10 KHz - 31.4 mH twist a loose wire to 12 KHz ^?
8 KHz - 48.2 mH add 47.761 turns
5 KHz - 67.5 mH add 45.325 turns
4 KHz - 87.9 mH add 41.324 turns
3 khz - 156 mH add 110,982 turns
Bandwith?
Help is much appreciated!
Kind regards
Im going to wind an tapped toroid inductor for a LCR circuit in an equalizer.
I have calculated the number of turns i need for each winding.
This is my first time winding an inductor so i need to get some things straight.
Im confused about the bandwith tap, how should i wind this on, just one turn to the core?
Also the 10 KHz tap, should i twist a wire with the 12 KHz tap in
order to have two taps with 31.4 mH?
Info:
Core type MPP
OD 39.90mm
ID 24.1mm
HT 14.5mm
AL value: 740 +/- 8% (nH)
MPP Permeability: 550 (μ)
Wire gauge: 34AWG
16 KHz - 29.9 mH 194.851 turns
Wire lengh 8.829m
12 KHz - 31.4 mH add 4.827 turns
10 KHz - 31.4 mH twist a loose wire to 12 KHz ^?
8 KHz - 48.2 mH add 47.761 turns
5 KHz - 67.5 mH add 45.325 turns
4 KHz - 87.9 mH add 41.324 turns
3 khz - 156 mH add 110,982 turns
Bandwith?
Help is much appreciated!
Kind regards
