logo elektroda
logo elektroda
X
logo elektroda

Guidance on Soldering RCA Cable (line out) to BMW Business CD Blaupunkt (BMWCD43) TDA7376B

pczynke 9525 1
ADVERTISEMENT
Treść została przetłumaczona polish » english Zobacz oryginalną wersję tematu
  • #1 9048398
    pczynke
    Level 2  
    Hello, I have a serial radio as in the subject and I would like to lead the RCA cable (line out), I know what pins to chip in, but I am looking for a person who has already done it and can help I know that I need to solder in front of the preamplifier but here is the problem because I do not know where it's best to do it.
    greetings
    Guidance on Soldering RCA Cable (line out) to BMW Business CD Blaupunkt (BMWCD43) TDA7376B
  • ADVERTISEMENT
  • #2 9049734
    djlj24
    Car audio specialist
    With a digiceivera (this square system at the back with the Motorola logo - M like a bat) via electrolytic capacitors (one of this row on the left) the signal goes to the power amplifier at the input (IN on the application note). And the signal can be picked up from these capacitors.
ADVERTISEMENT