Elektroda.com
Elektroda.com
X

Fagor Vintage VT-6: Resolving Power Supply Failure in Drink Cooler - Overloaded Transformer

marek-p 15960 3
This content has been translated flag-pl » flag-en View the original version here.
  • #1
    marek-p
    Level 10  
    Fagor Vintage 6 maybe someone had a problem with the power supply of this drink cooler. Similar to computers, I disconnected it from the control panel, fan, el. cooling. I connected the artificial load with a 12V / 20W bulb, replaced many elements with new ones that I thought could cause a fault and nothing. After applying the power, the bulb and the diode will blink and you hear the transformer on overload? Simple, but I can't cool the wine :)
  • #2
    czolgista
    Level 27  
    More info, add photos etc.
  • #3
    marek-p
    Level 10  
    I took a photo, the diagram that you can see from the computer power supply, the circuit on the board is partially similar in the main part. During the test, the red diode flashes, the green diode does not light up at all. I couldn't find the schematic of the board: FX-102 PCB50418E1
    Fagor Vintage VT-6: Resolving Power Supply Failure in Drink Cooler - Overloaded Transformer