External roller shutter controls without wall drilling - how to install?

Welcome.

I've already set up a topic but probably in the wrong section - the topic is about the installation of external roller shutter controls. Here what I wrote - at the same time I ask the moderator to move the whole thing here:

https://www.elektroda.pl/rtvforum/topic3085320.html#14980386

I would like to ask for opinions, comments and help from those who know and understand the subject. However, please take all conditions into account, so please do not let opinions be "the only right one" because someone installs controls by one company and in one type, and that's it.

Thank you for your help from the top down and the side - and it is needed because of the time I have, or in fact the time I do not have much.



edit:

There is a problem with the whole thing. Well, apart from the kitchen, living room and one room, I do not want to put holes in the walls. The problem is both the reluctance to punch holes and the installations in the walls. Is it possible to have the controls mounted externally, in a box in the wall? Only that this would enable the roller shutter to be controlled from outside with little interference. Is it possible to control 3 motors with one control, possibly using some elements in the roller shutter boxes themselves?

Hello,
after reading this and the previous topic I think I can help you. We offer wireless automation with micromodules. As far as the control is concerned, it is possible to control individual roller blinds as well as whole groups of roller blinds with a remote control and the global control with a telephone with internet. You can find more information on our website in my profile or by telephone, which is also there.