I am looking for a simple free program for switchgear and installation design

What software recommendations do you recommend for simple / easy to use software for designing / drawing switchgear and installation? For example, to design the installation in the house and present here on the forum to assess whether the installation will be done correctly. As I was looking at Google, I found two programs: Spider from Moeller / Eaton and XLpro from Legrand and website
http://www.fachowyelektryk.pl/systemy-i-programy/1525-projekt-w-kilka-minut.html
and paid programs from PLN 1000 up.
I also found the following thread but it turned out that the diagram is drawn in Paint and instead of symbols there are pictures of protections and electrical apparatus
https://www.elektroda.pl/rtvforum/topic3297898.html

Hello
I work on a hagercad.one program you need to calmly get to know, read in the pop-up text, be careful what you choose and a little intuition. Then a few trials and you can start the project.

cuma67 wrote:

For example, to design the installation in the house and present here on the forum to assess whether the installation will be done correctly. (...)
I also found the following thread but it turned out that the diagram is drawn in Paint and instead of symbols there are pictures of protections and electrical apparatus
https://www.elektroda.pl/rtvforum/topic3297898.html

Buddy, but none of us requires that the diagram be drawn in a professional program. It's enough if you draw a pencil on a sheet of paper and scan it or take a picture.
Mainly, we want to be symbols, types and basic data instead of beautifully colored bars, miniature photos of devices and other devices. Such as will be taken in real schemes.

Thanks for the help. Subject to be closed.