Hello all I have a problem with the JBL charge 3 loudspeaker and recently I updated the loudspeaker but after the update I can not turn it on now. Nothing works. I do not react. I searched the Internet for something that could help me restore the old software, unfortunately I can not find...

Incorrect software upgrade, no programmer and no batch. Please, leave the equipment for the JBL service (currently SAMSUNG) if it is under warranty.

I would like to resume the topic again. Has this situation happened to someone and he managed to solve the problem? If so, I am asking everyone for help, I immediately say that the service is not an option.

Hello, I have updated jbl flip 3 and also did not want to turn on. The same day I called back, etc., and nobody knew. It took about an hour and connected it to charging. He did not react. The cable was connected for about two minutes and switched on and loaded. I released music and played. Maybe it's a temporary error in the system in the speaker. I think it must have been possible after the update.

Unable to Turn On JBL Charge 3 Speaker After Software Update: Restoring Old Firmware

Reply | New topic

#1 16517977 07 Jun 2017 22:08

TheJBorginal TheJBorginal

Level 8

» |

Post #1
16517977 07 Jun 2017 22:08

Hello all
I have a problem with the JBL charge 3 loudspeaker and recently I updated the loudspeaker but after the update I can not turn it on now. Nothing works. I do not react. I searched the Internet for something that could help me restore the old software, unfortunately I can not find anything.
Please help.
ADVERTISEMENT
#2 17464278 15 Jun 2017 11:36

michald michald

Level 34

» | Positive voted Helpful post? (+10)

Post #2
17464278 15 Jun 2017 11:36

Incorrect software upgrade, no programmer and no batch.

Please, leave the equipment for the JBL service (currently SAMSUNG) if it is under warranty.
ADVERTISEMENT
#3 17473553 02 Oct 2018 16:44

TheJBorginal TheJBorginal

Level 8

» | Topic author Helpful post? (+1)

Post #3
17473553 02 Oct 2018 16:44

I would like to resume the topic again.
Has this situation happened to someone and he managed to solve the problem?
If so, I am asking everyone for help, I immediately say that the service is not an option.
#4 17582433 24 Nov 2018 17:37

JabolowyMajsterkowic JabolowyMajsterkowic

Level 2

» | Helpful post? (+3)

Post #4
17582433 24 Nov 2018 17:37

Hello, I have updated jbl flip 3 and also did not want to turn on. The same day I called back, etc., and nobody knew. It took about an hour and connected it to charging. He did not react. The cable was connected for about two minutes and switched on and loaded. I released music and played. Maybe it's a temporary error in the system in the speaker. I think it must have been possible after the update.
Create an account, log in and become active in a forum and ads will not appear. You will receive points by participating in discussions.
Join this discussion.

Install the application

Didn't find an answer? Ask Artificial Intelligence

*I agree to send the question to OpenAI, Anthropic PBC, Perplexity AI, Inc., Kagi Inc., Google LLC - owners of language models in order to prepare the best response. The companies may monitor and log information entered into the form.

*I agree to publicly display my question and answer. The question and answer will be publicly available to everyone. The process may take a few minutes. Upon completion, you will be redirected to the page with the answer.

Wait...(2min)

Reply | New topic

Report a violation of the law

Unable to Turn On JBL Charge 3 Speaker After Software Update: Restoring Old Firmware

Didn't find an answer? Ask Artificial Intelligence