logo elektroda
logo elektroda
X
logo elektroda

[Solved] Lathe TYPE DLZ 11 Buhlamann&Simonet - I am looking for information

magistersolernus 1461 2
ADVERTISEMENT
This content has been translated flag-pl » flag-en View the original version here
  • #1 20456531
    magistersolernus
    Level 2  
    Hello all users.

    Some time ago I bought a Swiss precision lathe because the one I had before was too small for me. (small table Chinese). A lathe for its age, I think about 100 years old, in perfect condition. I am impressed with the work of this machine. I'm not from the industry, but the workshop is my escape from the problems of everyday life. The whole problem is that the machine lacks change wheels. The lathe on its cast-iron pedestal has the following name: TYPE DLZ 11 Buhlamann&Simonet SA Soleure Svisse. Before I logged in here, I searched the roses forums and I can't find anything. If any of the more experienced colleagues would like to share information about this device, I would be very grateful. Regards. ps. Attached are pictures of the lathe.




    ----
    Taken from the topic: Welcome theme for new users - introduce yourself
    by Felini on 24 Feb 2023 21:07
    Attachments:
    • Lathe TYPE DLZ 11 Buhlamann&Simonet - I am looking for information 322123004_552038983223909_8112284913961285569_n.jpg (14.11 KB) You must be logged in to download this attachment.
    • Lathe TYPE DLZ 11 Buhlamann&Simonet - I am looking for information 321409622_865187651396443_7375437651491424375_n.jpg (16.35 KB) You must be logged in to download this attachment.
    • Lathe TYPE DLZ 11 Buhlamann&Simonet - I am looking for information 321757668_468539092104589_8732111094743584875_n.jpg (14.39 KB) You must be logged in to download this attachment.
    • Lathe TYPE DLZ 11 Buhlamann&Simonet - I am looking for information 321760893_1633471390403146_5441121555579254166_n.jpg (12.12 KB) You must be logged in to download this attachment.
    • Lathe TYPE DLZ 11 Buhlamann&Simonet - I am looking for information 315530055_2102690446589770_406679570995318293_n.jpg (14.71 KB) You must be logged in to download this attachment.
  • ADVERTISEMENT
  • Helpful post
    #2 20457401
    Zbych034
    Level 39  
    All you have to do is measure and count what wheels you need. Be prepared that they will not be cheap to make.
  • #3 20483287
    magistersolernus
    Level 2  
    I have not solved the problem, I have searched hundreds of websites and cannot find anything. Greetings to all forumers.
ADVERTISEMENT