Where to buy a KNXSMI 16 output actuator (Warema 16M230, Becker) for SMI blinds?

hubiwit · 2025-04-23T13:44:42+02:00

Hello, looking for where to buy a KNX/SMI 16 output actuator to control facade blinds over SMI bus e.g.: - Warema 16M230 2022211 - Becker KNX/SMI-Actor REG-3TE 16K BT Can anyone share their opinion on purchasing from this shop: . Regards

hubiwit 117 0

Treść została przetłumaczona

Zobacz oryginalną wersję tematu

Reply | New topic

#1 21528107 23 Apr 2025 13:44

hubiwit hubiwit

Level 25

» |

Post #1
21528107 23 Apr 2025 13:44

Hello, looking for where to buy a KNX/SMI 16 output actuator to control facade blinds over SMI bus e.g.:
- Warema 16M230 2022211
- Becker KNX/SMI-Actor REG-3TE 16K BT

Can anyone share their opinion on purchasing from this shop:
https://www.eibabo.pl/warema/silownik-knx-do-...onecznej-sa-16m230-smi-reg-2022211-eb17042146 <br/span>.

Regards
ADVERTISEMENT
Create an account, log in and become active in a forum and ads will not appear. You will receive points by participating in discussions.
Join this discussion.

Install the application

Didn't find an answer? Ask Artificial Intelligence

*I agree to send the question to OpenAI, Anthropic PBC, Perplexity AI, Inc., Kagi Inc., Google LLC - owners of language models in order to prepare the best response. The companies may monitor and log information entered into the form.

*I agree to publicly display my question and answer. The question and answer will be publicly available to everyone. The process may take a few minutes. Upon completion, you will be redirected to the page with the answer.

Wait...(2min)

Reply | New topic

Report a violation of the law

Read more new topics

Tuya Smart Breaker with OpenBK: MQTT Integration for HomeAssistant Energy, Voltage, Power, Toggle
25 Jun 2025 18:11 (6)
I need help with Tuya smart circuit breaker flashed with OpenBK. How to MQTT to HomeAssistant consuption,voltage,power and control Toggle function? here is my autoexec // Start TuyaMCu driver startDriver TuyaMCU // set TuyaMCU baud rate //tuyaMcu_setBaudRate 115200 // set TuyaMCU default wifi state 0x04, which means "paired", // because some TuyaMCU MCUs will not report all data // unless they think...[Read more]
Connecting Two AHT2x Sensors to XH-WB3S (BK7238) with Multiple I2C Addresses
24 Jun 2025 16:25 (2)
Is it possible to have two AHT2x compatible sensors on one XH-WB3S, Chipset BK7238 ? The AHT30 breakout boards I am using have no obvious way to change the I2C address. Intended measurement before and after a cooler. This did not work as I hoped: backlog startdriver AHT2x 7 8 1 2; startdriver AHT2x 23 28 3 4;[Read more]
Smart Gateway RSH-GW006 to OBK Conversion: Tools, Files, Setup, and Integration Guide
24 Jun 2025 15:02 (9)
This is supposed to be a WIP thread for converting a Smart Gateway, Model: RSH-GW006 to OBK Purpose is to create a centralized place with descriptions, tools, files and setup for full conversion. AliExpress link for the device in question - Teardown pictures of the device: Device has 4 small screws hidden under the rubber feet Board pinout: Board schematic: IMPORTANT!!! in order to set the WBRG1 module...[Read more]
Hi-Link HLK-B30 Development Board with C-Chip CC8000 and OpenBK7231U Firmware
22 Jun 2025 23:20 (16)
There are a few posts around that reference the C-Chip CC8000/BK7231U chip and that it can be found on the Hi-Link HLK-B30 development board, but experiments with it appear mixed in with several other threads, so here's a thread dedicated to the HLK-B30 and now with OpenBK7231U. [line:1477a30e77] Pin Pin Name Type Descriptions 1 CEN I Chip enabled, highly effective 2 P26_PWM5 I/O P26,PWM5 3 P24_PWM4...[Read more]
Reversing PWM Output Logic for P-Channel MOSFETs on WB8P (BK7231T) Module
22 Jun 2025 20:17 (7)
Hello, I created my own Night light with all custom parts and wb8p (BK7231T) module. However I selected P-channel mosfets for the led control. Can anyone advise me on how to reverse PWM so LOW (0v) is the on state? I really prefer not to build level inversion circuit, as it just seems dumb. There are some additional questions on how to read the Light sensor connected to ADC, but this is not as urgent....[Read more]

Where to buy a KNXSMI 16 output actuator (Warema 16M230, Becker) for SMI blinds?

Didn't find an answer? Ask Artificial Intelligence