How to Use an External Phantom Power Supply with Behringer UB502 Mixer and Condenser Mic

120 1

ADVERTISEMENT

Report a violation of the law

Reply | New topic

#1 21664296 24 Oct 2012 10:37

Hubert Rajakumar Hubert Rajakumar

Anonymous

Post #1
21664296 24 Oct 2012 10:37

I have a Behringher mixer UB502, it does not have Phantom supply. I want to connect a microphone which works with phantom supply. I want to know how to integrate a phantom power supply to get best results.
ADVERTISEMENT
#2 21664297 24 Oct 2012 12:29

Peter Evenhuis Peter Evenhuis

Anonymous

Post #2
21664297 24 Oct 2012 12:29

It needs a simple choke / coil in series with the power supply and microphone signal. And on the signal input you use a voltage blocking capacitor.
Or if you want more details see the following link.
http://sound.westhost.com/project96.htm
"(phantom power)":http://sound.westhost.com/project96.htm
Create an account, log in here. You will receive points by participating in discussions.
Join this discussion.

Install Elektroda application

Didn't find an answer? Ask Artificial Intelligence

*I agree to send the question to OpenAI, Anthropic PBC, Perplexity AI, Inc., Kagi Inc., Google LLC - owners of language models in order to prepare the best response. The companies may monitor and log information entered into the form.

*I agree to publicly display my question and answer. The question and answer will be publicly available to everyone. The process may take a few minutes. Upon completion, you will be redirected to the page with the answer.

Wait...(2min)

Reply | New topic

Report a violation of the law

ADVERTISEMENT