LANC PCB design for REC on/off, ZOOM, and Speed control functions wanted

LANC functions has to do three options : REC on/off, ZOOM, Speed control for zoom
That's it.

If you can design and prototype one I'd like to speak with you.

http://yertiz.com/rwc/pcbcont.htm

Theres you answer ( Time to find (two millisconds ) ) // search google under LANC design TUNC

Thank you !

I did a few search and takes me to Digikey
Don't know where is the search for this forum.

I also searched Google but I didn't get that link for some reason....
I'll look at the design and see if that is usable for my need. Searched for days and didn't find anything I can use... thus, my post.

This is the LANC control I was using (Hacked) for a product.
http://www.webkruzer.com/manfrotto585/

It's considerably smaller and few commands it has suits me fine but lacks the zoom speed control.... I may still need someone to design one with a pin-out for all the buttons and pot located on a hardware. I just need the PCB reasonably small size like this Manfrotto 585
The Chip is Atmel's tiny 13v Don't know what the V stands for.
Hey, thanks again for your post

Heres another site looks very good
http://esac.org.uk/SonyLancControl.asp

I strongly recommend you save the pages concerned for off line use as allot of people are taking this information down off the sites reason being lack of interest

Its costing these people money to put hours of work into this plus site costs so that people we hoped would learn from this and be able to do better things in life or thats what we hoped having watched the number of bussinesses closing thier doors not to mention all the oher problems some of them have caused

I thinbk some of you are starting to work out exactly what they have done here put it this way we hope alot of you are working this out !!

We have already worked out what they are up too never mind the implications of what they've done ro what this is going to bring about

Let you think on this one out yourselves Lovley isnt it ( how to start a civil war by shutting all the shops and making shure people have no work ) Your working this out now arent you !!


So use your loaf a bit here a bit before this hits some of you and invest your money wisely in decent tools equipment and what you need to do these jobs and other jobs as well ( animals not the word for this !!)

Hers another couple of sites for you as well This has full explanations on the code and frame format How the sony protocol is achieved

Should make this alot easier for you

Doing this with Atmel
http://micro.arocholl.com/index.php?option=co...id=19:lanc&catid=35:arduino-article&Itemid=53

The frame format itself for Sony
http://www.boehmel.de/lanc.htm

Welcome by the way all the best with this

Mark, I don't know how to thank you for your help, good links and advice
I agree with you, people are not very responsive with feed-back and at least to say thank you.

I am an OEM (Original Equipment Manufacture ) developing products for videography. Just a small outfit trying to improve on existing products or offer something better. Currently the project is in a prototype stage and the LANC item is needed to complete the product. I can give you links to the product when it's completed.

I think the other subject we were hoping for was that some people would get together and start self help groups so that we can people back into work but again as usual greed took over as it normally does so again use your brains see if you can help a few people with this , possibly start some form of bussiness collectivley without the arguments (Half the problem solved) A dam site more than the governments are doing I can tell you that much

My Friend your welcome if I can help i will be nice if oher trade and industry sectors would follow example

Wed have a lot more people back in employment if they did instead of this normal non co operative attitude

If youd like assistance with this shout see what i can do for you

Yeah, I agree.
I am determined to mfg all my products in the US and try to compete with the Chinese brands. It's not easy, but can be done.

Am also wiling to pay anyone for the circuit construction/prototype. Should this LANC circuit and product be sold, I may even kick in a few more Dollars to show my appreciation for job well done. So, the task is out there and all I need is a figure how much the person charge for this design. Am not an engineer and the only thing I know about electronic is how to turn it on