Driving H-bridge at 150Hz Using Two IR2153 Half-Bridge Drivers With 180° Phase Shift

Hi all,

I am trying to design an H-bridge (aka full-bridge) chopper to drive a transformer at about 150 Hz..


Half-bridge drivers such as the IR 2153 are inexpensive and easily found. Do you know of a full-bridge version?

I have simulated this circuit and it works quite well.

Is it possible to drive two IR 2153 with a common clock and a 180 degree phase shift so each IR 2153 will take care of one side of the H-bridge?

Thanks in advance,

Yvan