We are looking for help.
We need 1 clock signal to switch 6 channels.
Channel 1 and 2 are both 60 Amp MOSFET (or IGBT or GaN) ( 2 per channel) (Max 80 Amp)
Channel 3 needs to power GaN-FETS (bidirectional) (2 pieces) (Max 30 Amp)
Channel 4 needs to power MOSFETS 30 Amp (2 pieces) (Max 30 Amp)
Channel 5 needs to power MOSFETS 30 Amp. (4 pieces) (Max 30 Amp)
Channel 6 needs to power MOSFETS 30 Amp. (20 pieces) (Max 30 Amp)
We now use a Omron timer and ssr's and we set times on and of in milliseconds. We want to be able to set every channel individually on or of. We want to correct in micro seconds. Setting the timer must be easy and quick if possible. If a configuration works we want it to work with a start button (and stop) without having to program it again. Our system works on 11 - 14 volt. Channels 1-2-3-5 are used for inductive loads and 4 - 6 for capacitive loads.
Can somebody please help us
We need 1 clock signal to switch 6 channels.
Channel 1 and 2 are both 60 Amp MOSFET (or IGBT or GaN) ( 2 per channel) (Max 80 Amp)
Channel 3 needs to power GaN-FETS (bidirectional) (2 pieces) (Max 30 Amp)
Channel 4 needs to power MOSFETS 30 Amp (2 pieces) (Max 30 Amp)
Channel 5 needs to power MOSFETS 30 Amp. (4 pieces) (Max 30 Amp)
Channel 6 needs to power MOSFETS 30 Amp. (20 pieces) (Max 30 Amp)
We now use a Omron timer and ssr's and we set times on and of in milliseconds. We want to be able to set every channel individually on or of. We want to correct in micro seconds. Setting the timer must be easy and quick if possible. If a configuration works we want it to work with a start button (and stop) without having to program it again. Our system works on 11 - 14 volt. Channels 1-2-3-5 are used for inductive loads and 4 - 6 for capacitive loads.
Can somebody please help us
