The building has 10 separate rooms. Want the circuit to turn on LEDS to light each room sequentially. Another words you turn the circuit on, a 555 timer pulses and turns on room one. About 5 seconds later, the clock pulses again and turns on a second room while the 1st stays on. this continues until all 10 rooms are finally lighted. Than they reverse and start to go out one by one. Than the cycle keeps repeating. I want to build this using the CD4000 family.
Any clues as to what specific chips to use would be greatly appreciated. I am at the point of a 555 clock pulsing a cd4017. Where do I go from there?
Any clues as to what specific chips to use would be greatly appreciated. I am at the point of a 555 clock pulsing a cd4017. Where do I go from there?
