Multisim circuit shows unexpected DC output—what could cause this simulation result?

45 1

ADVERTISEMENT

Report a violation of the law

Reply | New topic

#1 21672872 01 Dec 2014 14:26

Mo Dray Mo Dray

Anonymous

Post #1
21672872 01 Dec 2014 14:26

hi

i was just messing around with multisim and got this very weird behavior which looks like dc ? can someone explain why is get this output?
ADVERTISEMENT
#2 21672873 02 Dec 2014 00:49

Richard Gabric Richard Gabric

Anonymous

Post #2
21672873 02 Dec 2014 00:49

Put the other scope probe on the output from the signal generator(with the same input sensitivity as the other channel), and a current probe on the capacitor. Change the value of the 1K resistor and see what effect it has. Put a resistor with different values from the output of the capacitor to ground and see what effect that has. Knowing how a diode works, you should have all the clues you need to figure it out.,
cheers,
Richard
Create an account, log in here. You will receive points by participating in discussions.
Join this discussion.

Install Elektroda application

Didn't find an answer? Ask Artificial Intelligence

*I agree to send the question to OpenAI, Anthropic PBC, Perplexity AI, Inc., Kagi Inc., Google LLC - owners of language models in order to prepare the best response. The companies may monitor and log information entered into the form.

*I agree to publicly display my question and answer. The question and answer will be publicly available to everyone. The process may take a few minutes. Upon completion, you will be redirected to the page with the answer.

Wait...(2min)

Reply | New topic

Report a violation of the law

ADVERTISEMENT