Why can’t AC electricity just be multiplied with pulleys

It’s workings are super simple
You put power into a motor to drive a large pulley only once (little energy)
+ You get out a multiple of that electricity
Depending on how small the generator pulleys are
As well as how many generators with little pulleys attached

With the amount of belt that goes around one large rotation
You can easily get 10 – 20 times the rotations of the input pulley
Then you can double your rotations each time you add yet another generator
On your own belt system, (easily done – takes little torque)

I figure, you simply must gain a multiple of the energy that you put in
As you are only putting enough power into the drive motor to rotate it only once
And you get back many times the electricity
Not only having smaller pulleys,
But gaining more rotations per foot of belt that you go through
To double or tripling your rotations by adding additional generators
on their own mini-pulleys

Free Energy is such an obviously simplistic discovery,
- as well as being extremely free + easy to produce,
what is the only reason for us missing this basic idea,
- we have been dumb to this free energy technology .

This technology has been hidden for far too long,
Please, go to this website
Search free-energy + yolasite
Or if this website allows URLs
http://free-energy.yolasite.com/

then try your hand at producing a digital prototype
on one of the many free electronic simulator software’s out there,
that will help start producing electric toys + tools,
and how about everything that runs on electricity,
being reproduced with free energy power supplies built into them.

Let's restart our economies,
by building industries that reproduce all of our electronics,
so that they are all self powered. (non polluting)

= First though, is getting rid of all the gasoline motors in our motorized vehicles,
and putting a GEM in them.

All we need to do, is have enough faith in His Word
to build these GEM (Good Electricity Multiplier) Miracle motor

THIS DOES INDEED WORK
(think about how simple this is)
(you put power in to rotate one large pulley once)
(you run a belt to rotate mini-pulleys many time)
(then you could add many mini-pulleys)
(each one rotating hundreds of times)
(multiplying your AC electricity)
(YOU MUST GAIN FREE ENERGY)

LOGICAL REASONING
It takes little energy to turn a one foot circumference pulley,
which can be used to drive a belt that turns a mini pulley
of one inch circumference many times
This 12X you gain your AC energy from the many times the small pulley rotates,
or even more from the many generators on mini-pulleys you add (no torque)
you can twelve times the AC electricity with every extra genertator attached
12X + 12X + 12X + 12X each starts to add up very quickly
all of these generators run free of any torque

come on guys + gals, this is so simple that it just has to work
you only put the small amount of energy to rotate a big pulley once
and you use pulleys to multiply your rotations many times
you could have ten mini-pulleys rotating hundreds of times
you simply must gain electricity
the torque is your only problem
and that would be minimal
if you only had a 12 inch circumference pulley
then you have 3 mini-pulleys
rotating 36 times for each one rotation of your large input pulley
YOU JUST HAVE TO MULTIPLY YOUR ELECTRICITY

Hi,joe Lynch,t
your idea is good but it is difficult to multi the power,for example if you make mini
inverter you are using power from the battery to work the oscillator circuit of the
inverter there by getting an ac voltage on the sec winding of the inverter transformer
and using it for powering your electrical equipments, as per your idea we could have
charged the battery using a battery charging circuit from the same generated
power from your inverter transformer anyhow this is not possible that is why we
charge the battery from the ac mains in put socket. As per a famous scientistic
may be edicen the theory is POWER CANNOT BE CREATED NOR DESTROYED




Regards Sambath kumar

Power out equals power in minus losses, which are not insignificant on what you propose. There are i squared r and frictional losses (heat in the pulley system)to start with, and the list goes on. Rotational speed does not imply greater power output either,
cheers,
Richard